- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
380 results in 0.0168 seconds.
-
Hi LT, I think it is just a matter of performing a test spot and seeing how the paint responds to any particular process.... -
If you can feel the spots with your fingernail, they’re likely tiny chips or pits. If not, they might be residue, mineral deposits, or etching. Try a clay bar, a vinegar/water mix, or a glass polish like Cerium Oxide. A razor blade can help with stubborn spots. If they’re actual pits, polishing...Leave a comment:
-
Vehicle is a 1979 Chrysler Cordoba 300.Leave a comment:
-
What type of car is it? Some were finished with lacquer and some were enamels and a few were the start of bc/cc.Leave a comment:
-
Leave a comment:
-
It sounds like you’re dealing with a combination of de-icing chemicals and bonded road grime, which can be especially difficult to remove after they’ve dried onto the surface. Since traditional tar removers haven’t worked, try using a pre-wash foam or citrus degreaser, letting it sit...Leave a comment:
-
This looks like oxidation, UV exposure, or early-stage clear coat failure. If the discoloration fades temporarily after polishing but returns, it may be a sign of uneven clear coat wear. Instead of wet sanding, try using a mild polishing compound with a soft foam pad, working carefully in small sections....Leave a comment:
-
Mercedes Color Discoloration
I'm a neophyte so I have no idea what I'm dealing with. I'm 3rd owner. The paint is Mercedes Tenorite grey metallic
755/7755. I only can see it in direct sunlight and not in the shade. I used Meguiar's Ultimate Polish
and it appeared to improve....Last edited by NicholasM; Jan 2, 2025, 01:29 PM. -
Thinking a more potent solvent here. Don't necessarily have a specific recommendation other than more of an auto body shop, automotive specific solvent. IPA is not too strong in general, typically requires some dwell time, and works for certain contaminants. Many over the counter auto parts store...Leave a comment:
-
This is actually a very unique product that is highly durable. We chose to not claim any specific durability numbers, as there is a lot that goes into that, but real world we are seeing exceeding M799 or even M27 to give you an idea. It's also great because it is a spray on, spread, wipe off type application,...Leave a comment:
-
I have encountered this and I use fall out remover and a composite clay sponge. I wash area fist. leave wet. spray fall out remover and use sponge. you can hear the grit. once done rewash, dry etc. good luck...Leave a comment:
-
How durable is this?
How does it compare to the car spray products?...Leave a comment:
-
Hybrid ceramic wax generally lasts longer than traditional liquid wax due to its SiO2 technology, which adds durability and water beading. On average, hybrid ceramic wax can last 4 to 6 months, while liquid wax typically lasts 2 or 3 months. Longevity depends on factors like climate and maintenance,...Leave a comment:
-
Yes correct no longer produced....Leave a comment:
-
Sadly I had to throw out the dog hair tool, the teeth dry rotted and were falling off.Leave a comment:
Leave a comment: