Tweet
Whenever I use the gallon pump with Hyper Wash, it tends to drip after I have given it one pump. Does this happen to all of you, is there any way to fix it other than just letting the excess in the nozzle drip out?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
I once put swirls in my paint just to see what it looked like.
I don't always detail cars, but when I do, I prefer Meguiar's.
Remove swirls my friends. -
Re: Tolco Gallon Pump Dripping
Use a cotton swab to swab out the portion that dwells inside the spout and doesn't release during the pumping action?Originally posted by Andrew C. View Post
Place a cup or something under the spout to collect the drips? Maybe a small sponge?
Just trying to think outside the box...
-
Re: Tolco Gallon Pump Dripping
hum...smack it around to get the last few drips out of itComment
-
Re: Tolco Gallon Pump Dripping
I usually tip the jug forward so that whatever's in the nozzle runs out into the bottle.
Other than that, I haven't figured out any other way to avoid it.Comment
-
Re: Tolco Gallon Pump Dripping
I find some rubber plugs that fit in there and jam it in there after I'm finished pumping. Works well IMOHello, I am Isaac
Comment
-
Re: Tolco Gallon Pump Dripping
Tilt if forward to release excess product then plug it.Learning new things everydayComment
-
Re: Tolco Gallon Pump Dripping
Yup, tilt it forward. Im sure your local autoparts store would have Vacuum caps to fit over the end of the pump too.If its fast, loud, and runs on a flammable liquid...count me in.Comment
Comment