• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Getting Car Re-Painted - Tips?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Getting Car Re-Painted - Tips?

    I'm getting my 1995 TransAm re-sprayed in the coming weeks (maybe months?) and I wanted to know if anyone has any tips on getting the best job possible? The painter is a neighbor and family friend, he painted Peterbilt's for about 20 years before opening his own shop.

    My goal is to have a semi-flawless base and then take care of the paint with Meguiar's. It's been treated fairly well so far, but the recent clearcoat failure has me somewhat embarrassed to drive it around. Right now, it's got a 12 inches x 8 inch missing layer of clearcoat in the MIDDLE of the hood. With every wash / rain, the area gets a little bigger since water seeps under the clear and loosens it up.



    Any tips / recommendations will be greatly appreciated.
    NOTE: Post count does not reflect actual detailing knowledge.

  • #2
    Re: Getting Car Re-Painted - Tips?

    Certainly ask to see his work if you havent yet, and inspect it closely in the sun/lights, dont just stand 20 feet away and look at it.

    Ask exactly what products he will use, how many coats, sanding, buffing techniques, etc.

    Bringing that kind of info back here would certainly give some more experienced people an idea, though you may get some tips from others as well.
    2017 Subaru WRX Premium - WR Blue

    Comment

    Your Privacy Choices
    Working...
    X