• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Update on mustang engine issue.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 03mach1
    replied
    Re: Update on mustang engine issue.

    Those are pics of what i had to do to get the plugs that were underneath the air intake. Thos were the hardest plugs no doubt.

    Leave a comment:


  • 03mach1
    replied
    Re: Update on mustang engine issue.

    Leave a comment:


  • 03mach1
    replied
    Re: Update on mustang engine issue.

    I like them too. Adds some color to it. They match my Trick Flow pully kit. I got to clean my engine bay up. I aplogize that it is dirty it hurts my eyes. I put that mothers back to black on and it is a dust magnet. I live on my half dirt road and it the etire car gets dusty the second I get on the dirt or gravel.
    Thanks guys

    Leave a comment:


  • J. A. Michaels
    replied
    Re: Update on mustang engine issue.

    Nice. Looking good.

    Leave a comment:


  • roushstage2
    replied
    Re: Update on mustang engine issue.

    Looks good man! Nice work!

    Leave a comment:


  • 03mach1
    replied
    Re: Update on mustang engine issue.

    I got more pics on the way.

    Leave a comment:


  • 03mach1
    replied
    Re: Update on mustang engine issue.

    here is a pic of my car all finished with all the plug wires in. and I guess the bolt for one of the holes on the shock tower brace the thread was stripped after i took it out it would not go back in so i am going to rethread it.

    Leave a comment:


  • roushstage2
    replied
    Re: Update on mustang engine issue.

    Originally posted by stang97 View Post
    I use all kinds of gas. I get mainly Cheveron but sometimes I get Valero opr even safeway gas. When I get the safeway gas I get the high octane.
    If you mainly run Chevron, save some money and don't worry about running cleaners. Chevron has them in it already.

    Originally posted by stang97 View Post
    I got plug wires today. I am putting them on. And I hope this issue does not come back. I hope i found the problem in the spark plug and plug wires. If it does it again I am going to get the O2s. I would have bought it today but I spent 170 bucks today of plugs and plug wires and a fan belt for the bird and plug wires for the mustang so I think I have spent enough for the week.
    If the CEL is still on, I'd get that anyways because your engine isn't running right then.

    Leave a comment:


  • 03mach1
    replied
    Re: Update on mustang engine issue.

    I got plug wires today. I am putting them on. And I hope this issue does not come back. I hope i found the problem in the spark plug and plug wires. If it does it again I am going to get the O2s. I would have bought it today but I spent 170 bucks today of plugs and plug wires and a fan belt for the bird and plug wires for the mustang so I think I have spent enough for the week.

    Leave a comment:


  • 03mach1
    replied
    Re: Update on mustang engine issue.

    I use all kinds of gas. I get mainly Cheveron but sometimes I get Valero opr even safeway gas. When I get the safeway gas I get the high octane.

    Leave a comment:


  • Sal329
    replied
    Re: Update on mustang engine issue.

    Glad it all worked out. You need to swap in a 4V, I did on my 00 GT when I had it. Makes for changing spark plugs a lot easier

    Leave a comment:


  • roushstage2
    replied
    Re: Update on mustang engine issue.

    What brand gas do you use?

    Leave a comment:


  • 03mach1
    replied
    Re: Update on mustang engine issue.

    The lucas product did not have a interval rule on the bottle. I only use it two times a month at the most.

    Leave a comment:


  • roushstage2
    replied
    Re: Update on mustang engine issue.

    Just follow the instructions on the FI Cleaner. Running too much at too close of intervals can burn out injectors. For example, Chevron Fuel System Cleaner says to only use every 3,000 miles. Others say every fill up.

    Leave a comment:


  • 03mach1
    replied
    Re: Update on mustang engine issue.

    Thanks guys for all your suggestions that helped me out.
    Alexander

    Leave a comment:

Your Privacy Choices
Working...
X