Tweet
After I have washed my car, dried it, and used UQD, I still have a little bit of water spots on the car. Any recommendations on removing them? I think they are below the surface :/. The car is not even a year old.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Removing water spots
Have you tried swirlx or ultimate compound by hand? If that dosent give you the results your looking for you might look into a buffer.Practice doesn't make perfect, the dedication to achieve perfection makes perfect. "Smack"
2011 Jet Black 328i Touring
2007 Jet Black 335i Sedan -
Re: Removing water spots
Try cleaner wax. If the water spots are not that bad, the cleaner wax will remove the spots completely.
Comment
-
Re: Removing water spots
x2.quality creates its own demandComment
-
-
Re: Removing water spots
Yes. Take swirlx and put a dime sized drop on an foam applicator and thoroughly work it into the surface. When it becomes a very thin film, wipe off with a microfiber towel and if needed, move the vehicle into the sun to check your results. A second application may be required. If after the second passwith little improvement, try and application of Ultimate compound.Practice doesn't make perfect, the dedication to achieve perfection makes perfect. "Smack"
2011 Jet Black 328i Touring
2007 Jet Black 335i SedanComment
Comment