Tweet
I currently do a 2-step using 205 then following it with 21. I'm looking for a polish that can remove more defects but still be used right before LSP. Any suggestions.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
205 is a polish you can try a compound to remove defects try ultimate compound, or 105. Polish will just bring out the shine it does not have abrasives enough to remove paint defects like you want. 2 stage is normally a compound then followed by a polish. -
Re: 2-step polish and protect
SwirlX will be a bit stronger than #205. If you really needed a boost, Ult. Compound would be even stronger, and finishes out good on many cars.
You also could consider the Paint Reconditioning Cream. That is a stronger cleaner/wax, and a regular wax after wouldnt hurt.
Or looking toward the MF system.
What machines are you working with?2017 Subaru WRX Premium - WR BlueComment
-
Re: 2-step polish and protect
My opinion is to use D300 follow with D301 or LSP.Comment
-
Re: 2-step polish and protect
i use a cyclo, i just bought the new dewalt rotary with the responsive trigger and bale handle, but am not comfortable enough with it to use on a customers car. Does D151 have more corrective ability then 205?Comment
-
Re: 2-step polish and protect
i looked at the D300 system, but it looks like they dont offer 4 inch disk.Comment
-
Re: 2-step polish and protect
for these kind of jobs, i tend to use #205 or #83. Outcome is quite similar. On some paints, #83 cuts a little more.Arctic Detailing - Northern Norway
Facebook site http://www.facebook.com/home.php?#!/...12239962147393
1996´AUDI S6 AVANT QUATTRO
00`S6 tip 92´S4q, 97´S6q, 97´A4q, 02´A4q, 76´ Audi50Comment
Comment