My girls friends dad has asked me for some help with restoring a I believe its a 1958 travel trailer that was sitting in the mojave desert for most of its life. Well the aluminum is a dark shade of gray, and thats what he has asked my help on. Im not even sure were to start with something this bad. He has tried steel wool, with little succes. I am wondering if there is something that would work better. Most of this work will be by hand is in on the trailer with the glass installed.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
HEAVILY oxidized aluminum
Collapse
X
-
Re: HEAVILY oxidized aluminum
Originally posted by Mark Kleis View PostI know that some detailers here have worked on large vintage WWII airplanes that were made of aluminum. They used a rotary buffer, wool pads, and I believe Meguiar's Mag & Aluminum polish.
Can someone confirm which product was used with the rotary?
In Joe's thread Six days of polishing "The General's B25", they used a combination of Rolite and Optimum metal polish. Page 2 post 66 reveals this. Not sure about some of the others he's done.
ColinA common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.
Comment
-
Re: HEAVILY oxidized aluminum
Meguiar's Mag and Aluminum Polish is going to be the product of choice for this, from the Meguiar's line of products. If you are working by hand, you are going to want a lot of cotton terry applicator pads and towels. Due to the level of oxidation, it may take several applications to start to get a shine. Just rub and rub and it should start shining up after a bit!
Comment
-
Re: HEAVILY oxidized aluminum
Take a look at this site
Go over to the misc. info and check out the airstream polishing project.
''USE THE LEAST AGGRESSIVE PRODUCT TO GET THE JOB DONE RIGHT''
You Don't Know What You Can Do Until You Try '' TECHNIQUE IS EVERYTHING''
Test Hoods Are Cheap And Most Of The Time Free
Comment
-
Re: HEAVILY oxidized aluminum
Originally posted by roushstage2 View PostMeguiar's Mag and Aluminum Polish is going to be the product of choice for this, from the Meguiar's line of products. If you are working by hand, you are going to want a lot of cotton terry applicator pads and towels.
That's not a project, more like an imposed sentence!
TL
Comment
Comment