First time using DA/Work in progress

[_Rodrigo]

Re: First time using DA/Work in progress

Wooow! Very nice Rodrigo!

That black color is really deep now!! where did you get that 205 ?

Congratulations on the job well done!

(The little washer that I was talking about was the one that came with the manual and the wrench, it should go just before the backing plate.)

Hello!
THank you Tafner!

205 I bought from geral ferramentas ( www.geralferramentas.com.br ), but they do not have the 16oz bottle anymore. Today you can buy 1gal, 32oz or 8oz.

Ah yes, sorry about my poor english skills, it has a washer, i used to refer as spacer.

Did you tape your plastic trims ? How was the splatter when working with the PC ?

I did partially. Tape ended in the middle of proccess. Hard to find a new roll in these holidays.

If I understood your question, being the w68da flexible you can contour those trims but obviously there's a limit. You will notice the PC stops the rotation. And for me the worst area to detail is those sections immediatly below and above the trim, because the foam pad seems to have not enough cut there.



Did I answer your question?

[Tafner]

Re: First time using DA/Work in progress

Yes, that was exactly what I wanted to know, I've just got a PC 7424xp together with the new DA Microfiber System from ADS. Tomorrow I'll have some pics after I do the work.

You gave me the confidence to tackle the job, your car looks great!

[_Rodrigo]

Re: First time using DA/Work in progress

yeah! Congrats, nice purchase.

Good luck! You have more two days to do the job.

And God blessed us with this sunny holiday!

[Tafner]

Re: First time using DA/Work in progress

Sure did, I hope you're having a good holiday.

Best wishes.