Let me begin by saying sorry for not taking before pictures, but the paint did not have any major defects and was fairly clean when I began.
Their were a few minor swirl marks that I went after with some M205 and my buddies Flex.
Since this was my first time using a Flex, we decided to go with a none aggressive approach and use M205 to attack some of swirl marks which seemed to work out pretty well.
This was my process for the paint:
1. Washed with M62
2. Mild Detailing Clay
3. M205 on a W8207 polishing pad with a Flex 3401
4. M07 applied by hand
5 NXT 2.0 applied by hand




Their were a few minor swirl marks that I went after with some M205 and my buddies Flex.
Since this was my first time using a Flex, we decided to go with a none aggressive approach and use M205 to attack some of swirl marks which seemed to work out pretty well.
This was my process for the paint:
1. Washed with M62
2. Mild Detailing Clay
3. M205 on a W8207 polishing pad with a Flex 3401
4. M07 applied by hand
5 NXT 2.0 applied by hand
Comment