I think it is time for #83, D151, or both!
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
Re: My Mach
Phew... that does looks good.
Hindsight is always 20/20... Like they always advise us around here:
Do a test spot to confirm that the products/process you are using will work.Leave a comment:
-
Re: My Mach
I think the spots are either dust on your lens or digital image blur.
It looks really really
good from here.
Leave a comment:
-
Re: My Mach
No I do not have anything more aggressive unfortunately, but I'll most likely pick something up soon. I'll be doing another complete detail before winter strikes.Leave a comment:
-
Re: My Mach
Just checked on those spots in pic #4, but there's nothing on the car. I'm confused.Leave a comment:
-
Re: My Mach
It sure looks good in those pics!
If it takes more than 3-4 passes with the #80, than you should step up to a more aggressive product IMO.
Have you tried, or do you have anything stronger at your disposal?Leave a comment:
-
My Mach
Just detailed my Mach 1 yesterday and it took me all day so I took pics today to show the result. I didn't get all the swirl marks out, but a lot of them at least. I guess next time I'll just do 3 or 4 passes of M80. But here it is, hope it's up to par.
Oh, yea, wash, clay, M80, #7, NXT tech wax, and then Meguiars paste wax this morning too.
Leave a comment: