My Mach

[roushstage2]

Re: My Mach

Thanks man! The time thing is an issue with me too as of well, a while... That is why I figure if I just work by hand, I can do a section at a time when I have the time to do it and eventually work my way around the whole car. To use the DA for a section, I end up spending 3x longer dragging everything out, using it, cleaning it all up and putting it back away than grabbing a couple of applicator pads and MFs and going to work.

[MuscleCar3]

Re: My Mach

Awesome. MRT makes great cat-backs, they always sound killer. Their shop is not too far from me. A guy from a car club I am in used to work there. They put out some AWESOME cars.

Yea, that's what I heard. The SLP exhaust has always got my attention and I just couldn't pass it up on my Mach. And honestly, the MRT H-pipe and SLP LMI catback sound killer together. I did hear a couple MRT catbacks and they do sound pretty good.

Hmmmm....those spots look like they are in the clouds. UFO's perhaps! Great looking car by the way

Quite possible, you know, I always have that feeling of being watched. haha.

Wow, great work. Car looks sick man.

Thank you!

Very nice! Looks great!!

Thanks!

Yeah, M83 will get about 90% of the swirls/scratches out. I was thinking of getting some D151, but figured I could just get some M105 and do areas by hand and take my time.

Car looks great though! Nice job!

Yea, after a couple more paychecks and when I can free up some time, I'm going to do the entire car again. I'll pick some M83 up and do that then followed by 80, and my regular process. I wouldn't mind doing it by hand, but I just don't have the time anymore unfortunately. DA works for me though. And thank you. Your car looks good too.

[roushstage2]

Re: My Mach

Yeah, M83 will get about 90% of the swirls/scratches out. I was thinking of getting some D151, but figured I could just get some M105 and do areas by hand and take my time.

Car looks great though! Nice job!

[gb387]

Re: My Mach

Very nice! Looks great!!

[Lexus Guy04]

Re: My Mach

Wow, great work. Car looks sick man.

[SVT Lightning]

Re: My Mach

Hmmmm....those spots look like they are in the clouds. UFO's perhaps! Great looking car by the way

[Golden]

Re: My Mach

Thanks for all the compliments. And I actually do have D151, I was going to use both M80 and D151, but I called Meguiars and they said that it wasn't really made to be used together as D151 is a cut/polish/wax product. So I retract my previous statement about not having anything more aggressive, I do. I guess I know what I'll use next time.

And Golden, I do agree with that. Although, I got rid of the stock exhaust and put an MRT catted-H and SLP LMI catback.

Awesome. MRT makes great cat-backs, they always sound killer. Their shop is not too far from me. A guy from a car club I am in used to work there. They put out some AWESOME cars.

[MuscleCar3]

Re: My Mach

No, I'm sorry, it's just not up to par. You'll have to send that poor neglected Pony to me right away!

Really, it looks outstanding. Nice job.

..

Ok....

Hahaha and thanks.

[RogueGypsy]

Re: My Mach

No, I'm sorry, it's just not up to par. You'll have to send that poor neglected Pony to me right away!

Really, it looks outstanding. Nice job.

..

[MuscleCar3]

Re: My Mach

I think the spots are either dust on your lens or digital image blur.

It looks really really good from here.

Thanks! Ahh, that could be it. I unfortunately dropped my camera due to my dogs, but nothing broke, but that could be the reason why.

Phew... that does looks good.
Hindsight is always 20/20... Like they always advise us around here:
Do a test spot to confirm that the products/process you are using will work.

Do you mean I shold have used the M80 on a test spot to see if it got rid of the swirl marks? I did, and it got rid of them on the test spot. I might have just not done as good of a job on the other spots as I could have, but I'm still happy with the results. And thanks too!

[MuscleCar3]

Re: My Mach

Thanks for all the compliments. And I actually do have D151, I was going to use both M80 and D151, but I called Meguiars and they said that it wasn't really made to be used together as D151 is a cut/polish/wax product. So I retract my previous statement about not having anything more aggressive, I do. I guess I know what I'll use next time.

And Golden, I do agree with that. Although, I got rid of the stock exhaust and put an MRT catted-H and SLP LMI catback.

[Sal329]

Re: My Mach

Beautiful car, great job

[Golden]

Re: My Mach

Mmmmm, 4 valve. One of the best sounding stock cars ever. Looks great!

[J. A. Michaels]

Re: My Mach

The mach looks wet. Great work. Awesome reflections. Way to go.

[03mach1]

Re: My Mach

Looks awesome. Nice work. Try 83 works really good. I have not tried 80 yet on mine It looks like you had a great outcome with 80.