I was asked to do a full paint correction on a Volvo that had been machinepolished by a so called " pro-detailer" !!
The owner wasn't happy because the paint felt like sandpaper and there where holograms everywhere and the whole car was still covered with swirls!!
BEFORE.



AFTER WASHING with NXTcarwash & washmitt & 2bucketsystem.


AFTER CLAYING with Last Touch & white clay this became visible!




THEN TAPED ALL TRIMS .




AND COVERED THE CLEANED RIM'S.

DID A TESTSPOT : m83 on a w8006 polishingpad with the rotarybuffer did not remove any off the swirls,so i stepped up to m84 on a w7006 cuttingpad wich worked wonders en did remove all swirls after 1 pass !

WITH THIS COMBO I DID THE ENTIRE CAR.




AFTER CHECKING IN FULL SUNLIGHT I WAS PLEASED TO SEE THAT THERE WERE NO HOLOGRAM'S SO I DECIDED TO MOVE ON TO m80 on a w8006 polishingpad on the rotarybuffer.All picture's after m80 with no wax applied!!!







AFTER REMOVING ALL POLISHINGRESIDUE : applied m21 followed by m16, while m16 was left to cure i polished the rims with All Metal Polish and sealed them afterwards with m21 and finished them off with NXTtechwax.
RIMS BEFORE.

RIMS AFTER.

ENDRESULT.
















The owner wasn't happy because the paint felt like sandpaper and there where holograms everywhere and the whole car was still covered with swirls!!
BEFORE.



AFTER WASHING with NXTcarwash & washmitt & 2bucketsystem.


AFTER CLAYING with Last Touch & white clay this became visible!




THEN TAPED ALL TRIMS .




AND COVERED THE CLEANED RIM'S.

DID A TESTSPOT : m83 on a w8006 polishingpad with the rotarybuffer did not remove any off the swirls,so i stepped up to m84 on a w7006 cuttingpad wich worked wonders en did remove all swirls after 1 pass !

WITH THIS COMBO I DID THE ENTIRE CAR.




AFTER CHECKING IN FULL SUNLIGHT I WAS PLEASED TO SEE THAT THERE WERE NO HOLOGRAM'S SO I DECIDED TO MOVE ON TO m80 on a w8006 polishingpad on the rotarybuffer.All picture's after m80 with no wax applied!!!







AFTER REMOVING ALL POLISHINGRESIDUE : applied m21 followed by m16, while m16 was left to cure i polished the rims with All Metal Polish and sealed them afterwards with m21 and finished them off with NXTtechwax.
RIMS BEFORE.

RIMS AFTER.

ENDRESULT.

















Comment