Tweet
Ok well while the detail turned out great there were alot of draw backs. Yesterday i went to detail this ladies Buick but her garage would not fit the car in there because she had some painters over to do some work and they put all there stuff in her garage but luckily i was able to do the work in the neighbors garage that i did some work for a few days ago. That was the first draw back. So then i moved some stuff around in that garage so i could have room to work in. Then while i was over there claying the car i came to use my hose to wash my hands and looked down and i had paint all over my hands! The workers just went over and used my hose to clean there stuff off with and got paint all over the hose and the gun. So i went over there and let the owner of the painting business have it 
. Of course i made them go over there and clean it immediately. Its not just the paint i also use 2 in line water filters to purify the water to reduce water spotting and the filters are not cheap and they were using it to clean paint brushes and rollers. Ok well i got them to clean it so no big deal. Then i went back to the other garage and i noticed they were doing something in there. They were removing some panels of left over sheet rock from work they did in there a few weeks ago i guess and another person was sweeping all the loose sheet rock on the ground. At first it did not hit me but then i went to start compounding some of the scratches out and just as i went to i realized the entire car was now covered in sheet rock dust and they hit two of the tires that i already cleaned with the panels putting big white smudges on them so i had to touch that up to. Ok so after i used my leaf blower and some UQD to remove all the sheet rock dust i got back to work. Then later as i went to get my APC and dilute it in my bucket i saw paint all over my bucket 
They used it to clean stuff too. And got paint all over it and dint clean it. Fortunate for them they had already left by the time i saw this or i would have sprayed super degreaser all over the hood of the paint owners new truck in the direct sunlight and let him try and take care of it within 30 seconds. Ok i may have not went that far but i was mad. So that is what i mean by horrible detail job and sorry for the long write up but i had to vent. Anyways here was the process on the car it had a few scratches, and light swirls and the paint just looked dull
EXT
1. Wash - GC
2. Clay - SSCK
3. Clean/ Polish - #85 w/ W7006 pad where necessary, followed by #80 w/ W8006 pad on the whole car.
4. Wax - NXT 2.0 via orbital for application and removal
Interior was not to bad but here is a list of products used
1. APC
2. Oxiclean/ Quick out for cleaning the carpets
3. GC leather cleaner and conditioner
4. Quick Interior Detailer
Now for the pics
Before
After
Before
After
Before
After
Before
After
Some of the scratches on the trunk, i know they are hard to see but if you look they are there
All scratches gone
Another Before
And after
Polishing with #80 and multi tasking with the camera
A few more afters
And finally a few reflection shots
. Of course i made them go over there and clean it immediately. Its not just the paint i also use 2 in line water filters to purify the water to reduce water spotting and the filters are not cheap and they were using it to clean paint brushes and rollers. Ok well i got them to clean it so no big deal. Then i went back to the other garage and i noticed they were doing something in there. They were removing some panels of left over sheet rock from work they did in there a few weeks ago i guess and another person was sweeping all the loose sheet rock on the ground. At first it did not hit me but then i went to start compounding some of the scratches out and just as i went to i realized the entire car was now covered in sheet rock dust and they hit two of the tires that i already cleaned with the panels putting big white smudges on them so i had to touch that up to. Ok so after i used my leaf blower and some UQD to remove all the sheet rock dust i got back to work. Then later as i went to get my APC and dilute it in my bucket i saw paint all over my bucket They used it to clean stuff too. And got paint all over it and dint clean it. Fortunate for them they had already left by the time i saw this or i would have sprayed super degreaser all over the hood of the paint owners new truck in the direct sunlight and let him try and take care of it within 30 seconds. Ok i may have not went that far but i was mad. So that is what i mean by horrible detail job and sorry for the long write up but i had to vent. Anyways here was the process on the car it had a few scratches, and light swirls and the paint just looked dullEXT
1. Wash - GC
2. Clay - SSCK
3. Clean/ Polish - #85 w/ W7006 pad where necessary, followed by #80 w/ W8006 pad on the whole car.
4. Wax - NXT 2.0 via orbital for application and removal
Interior was not to bad but here is a list of products used
1. APC
2. Oxiclean/ Quick out for cleaning the carpets
3. GC leather cleaner and conditioner
4. Quick Interior Detailer
Now for the pics
Before
After
Before
After
Before
After
Before
After
Some of the scratches on the trunk, i know they are hard to see but if you look they are there
All scratches gone
Another Before
And after
Polishing with #80 and multi tasking with the camera
A few more afters
And finally a few reflection shots
I just realized that. This whole time i was thinking Buick and its probably because i did a similar one last week that was a Buick ( I think ) but thanks for pointing that out 
i even got down there and polished the chrome around the Mercury emblem and still thought Buick. I guess i was looking more at the reflection and gloss on the chrome than the words written in it 
Comment