M9 replace M82 ?

[TimG]

Re: M9 replace M82 ?

Morning.

KC, If M205 is too costly then one should find a substitute; One that would work mostly on our local car makers. Get in touch with Hitachi@Osren and with a seasoned white LC pad and RB+good technique, you could get a perfect finish (w/o holograms,etc).

Plus, I'm not shilling other brands, just sharing what I have know. (Mods pls feel free to delete if deemed unfit)

[KC's]

Re: M9 replace M82 ?

It can be done (finishing with RB only). Another factor to consider might be the paint itself. All the #9, #82, #80 & #205 gives great results if used correctly.

Tqs tim
what both of our quest is finishing with Rotary only (pure & neat)

as we hv RB done without questioned

we have both tried #80 #205 but marring & inconsistent hologram found
on black paint
Tqs again

[KC's]

Re: M9 replace M82 ?

Morning.

KC, If M205 is too costly then one should find a substitute; One that would work mostly on our local car makers. Get in touch with Hitachi@Osren and with a seasoned white LC pad and RB+good technique, you could get a perfect finish (w/o holograms,etc).

Plus, I'm not shilling other brands, just sharing what I have know. (Mods pls feel free to delete if deemed unfit)

Thanks Tim infact i am using LC now ..even finishing (black) LC ccs pad failed me on rotary


we want to finish black on the great rotary

[KC's]

Re: M9 replace M82 ?

It is too bad prices vary so much depending on where one lives...

Yes, you can certainly use M82 in place of M205, though M205 is a little more aggressive. I am not sure why your product is separating.... Shake the M82 and see if it goes back to a creamy liquid. If it does, it is the heat/humidity and you will have to shake it quite often ( I have had this happen with M81 Hand Polish).

Like I said, I like M82 better when used with the rotary, but with the DA, I like M09 as the extra TS Oils add a little extra "pop" to the finish.

Tim

Tim
thanks for sharing, after all those trying moment & sleepless night on black and soft paint here/with Rotary,
hologram still found visible (finishing with RB has not mush of an issue) as we are like trying to cross over a grand canyon with walking sticks

Although i did try on #205, but finishing with polishing pad minor holograms still visible under sunlight after hosing down with water . further more selling at USD150 per gal here, is way too premium for us. stock just arrive last wk.

Thanks for your guidance
app yr kindness