If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Welcome to MOL! You won't be disapointed with your purchase, reading the links posted above will get you started in the right direction! Good luck and let us know how it works out. Feel free to ask questions as needed.
madsekci listed a couple of Meguiars foam pads. You want to use Meguiars pads and not the one included in the Porter Cable kit.
Is the porter cable the same thing as the g-100 and is it suiteable for polishing. I have read that to polish you want a rotary.
madsekci is correct when he says they both are the same device.
G100A comes with a lifetime warranty, a Meguiars backing plate and polishing pad. The G100 is still a Porter Cable just with Meguiars name on it.
Porter Cables 7424 and 7336 are the same power unit but you will need to get Meguiars backing plate and pads, I wouldn't recommend using the pad(s) that come with the Porter Cable polisher(s). These only have a 1 year warranty.
Comment