Tweet
Dual Action Polisher Safety
Is it really true that the dual action polisher will not burn paint and not create swirl marks? I have polished cars by hand for 20 years but I have never tried a machine of any type to polish a car. I am very interested in getting a dual action polisher, but I don't want to ruin my new black Tacoma. Is the dual action polisher ok for a newbie? What are your opinions?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Hi there,
Here is the link that tells you all you need to know: -
Bryan -
While I recomend starting out by hand, since you already know the basics from past experience, a machine will be great.2017 Subaru WRX Premium - WR BlueComment
-
It's true, with appropriate pads and chemicals the DA polisher won't burn paint or create swirl marks.
They are easy and safe, even for a newbie. As with any handcraft it will take some practice to get the very best results but even as a beginner you'll get good results.
PC.Comment
-
Re: Dual Action Polisher Safety
Hi scroyal05.......Welcome to the forum!Originally posted by scroyal05
Is it really true that the dual action polisher will not burn paint and not create swirl marks? I have polished cars by hand for 20 years but I have never tried a machine of any type to polish a car. I am very interested in getting a dual action polisher, but I don't want to ruin my new black Tacoma. Is the dual action polisher ok for a newbie? What are your opinions?
Here's a link to a video you can watch....
(Scroll down to Power Polisher Clinic)
Nice country up your way.
r. b.Comment
-
That FAQ is great. I would highly recommend reading that to any new PC user like me.
-GTComment
-
I AGREEOriginally posted by GTScott
That FAQ is great. I would highly recommend reading that to any new PC user like me.
-GT
One thing I heard Barry Meguiar say on the video was to "never wash the pads"...that's contrary to some things I've read here...I've washed mine a couple of times already but am wondering now if I shouldn't anymore ? 
Everything else he said about the DA was absolutely true...I've used my new DA on two cars now and the results are truly amazing...I'll never polish/wax another car by hand...ever.....
Bill Poirier
West Seneca, NY 14224
"until you can afford a great car, always strive for a great looking car"Comment
-
Hey,
Meguiar's does not recommend washing the buffing pads. Instead, once dry, brush and tap out the residue of the surface.
Now with that said, many do hand wash the pads and allow them air dry. At least, that is what I have heard....
TimComment
-
Thanks Tim....I'm going to try NOT washing them next time....so basically, you let the product dry on the pad and then just smack the pad around a bit to get the gunk out of it....I'll try it, especially if that's what Meguiars recommends...Originally posted by 2hotford
Hey,
Meguiar's does not recommend washing the buffing pads. Instead, once dry, brush and tap out the residue of the surface.
Now with that said, many do hand wash the pads and allow them air dry. At least, that is what I have heard....
TimBill Poirier
West Seneca, NY 14224
"until you can afford a great car, always strive for a great looking car"Comment
-
Hey TKDDAD
That is correct. Immediately after using the pad, I suggest using a clean towel and try to squeeze as much product out of the pad as possible. Then allow the pad to air dry. Do not place the wet pad in a sealed bag. Wait until it dries. Then, once dry, tap the pad and/or use a nylon brush and gently brush the pad. You should have no problems!!
TimComment
-
I tapped out a W-7006 pad this week in a sink, and there was a lot of dried up residue that came out of that pad.
A good brushing loosened up even more residue.r. b.Comment
-
At my monthly NXT Detailing clinics, I teach newbies how to use the PC and within 5 to 10 minutes, they know how to handle the PC like a pro. Here are some things that I always remind my students. (Thanks Mike Phillips)
1.) Most people are surprised by how much it vibrates
2.) Make sure not to drag the power cord across your paint
3.) Don't drop the PC on your paint
4.) Keep firm even pressure on the head
5.) Don't show off and use it one handed if you aren't comfortable using it yet!
6.) Always start and stop the PC with the pad still against the paint to avoid splatter
7.) Mask off trim areas or do it the lazy way and clean up splatter with a toothbrush and QD.
8.) Again, Don't drop the PC
9.) You've got two pad choices--W8006 (Polishing Pad) or W9006 (Finishing Pad)
10.) Cutting pad is only used inside of a Microfiber bonnet for removing wax.
11.) When changing pads, don't drop the pad on the floor!!!!
12.) Slow overlapping arm motions are importantComment
-
Hi Octane,
One question, when using a machine do we use a "circular motion" or a "straight back & forth motion"?
Thanks
BryanComment
-
The motion really doesn't matter. I normally go in straight lines--just as long as I'm overlapping each pass. If you work in straight lines--as in outlining a box, and then filling it in, you can be certain you aren't missing anywhere. But there isn't any directionality to the buffing--i.e., neither one will work any better or worse. =)
Richard
Originally posted by Blr123
Hi Octane,
One question, when using a machine do we use a "circular motion" or a "straight back & forth motion"?
Thanks
BryanComment
-
That's cool thanks Richard.
BryanComment
Comment