just got my G-100. gonna use it on my 2000 xterra. i'm gonna start with #80, my question is how long do i work the product in the 2x2 area? I know you dont let it haze but how long before the diminishing agents are gone? thanks for the help
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
help
Collapse
X
-
-
Use a slow motion. Alternate side /side and up/down. Be sure to overlap your passes by about 50%. This helps in break down of product.
As RamAirV1 stated it doesn't take long. You'll see the product change from a tan/brown color to clear (on a darker paint).
Check out this great post by one of our fellow members. Using #83 and #80, and getting your G100/PC to do the work of a rotary. A picture says 1000 words!!!
Have fun and good luck!
Comment
-
I forgot that Mosca also used #80 in his demo. I was going to mention that thread but then deleted it because I thought it was #83 only LOL.
That demo should answer your questions.
RamAirV12015 Dodge Charger R/T Scat Pack 392Granite Crystal
2006 GTO Impulse Blue
Comment
Comment