• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

If i get the NEW DA from meguiars?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • If i get the NEW DA from meguiars?

    I think im gonna get the v2 DA from meguiars (when it comes out).....can i get pads from anywhere? local auto paint shop? they sell alot of 3m....are pads (if there the same size) universal????

  • #2
    Re: If i get the NEW DA from meguiars?

    Yes, you can use any 6.5" and up size pad with the new DA (any DA for that matter).

    Colin
    A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.

    Comment


    • #3
      Re: If i get the NEW DA from meguiars?

      the pad will just screw on or something like that?

      Comment


      • #4
        Re: If i get the NEW DA from meguiars?

        Originally posted by SX4DUDE2013 View Post
        the pad will just screw on or something like that?
        the only part you "screw in" the da is the backing plate. the pads and backing plate are velcro.

        Comment


        • #5
          Re: If i get the NEW DA from meguiars?

          o...ok. thanks!

          Comment


          • #6
            Re: If i get the NEW DA from meguiars?

            Or you can always change the backing plate, which you'd need to buy, to fit the 5.5" or 4" pads as well.
            -Kyle

            Comment


            • #7
              Re: If i get the NEW DA from meguiars?

              so if I get a PC 7424 and it comes with a Lake Country backing plate I can use Meguire 2.0 pads no problem then?

              Comment


              • #8
                Re: If i get the NEW DA from meguiars?

                Yes. Just match pad size with backing plate size. It seems like a norm that the pad is half an inch bigger than the pad, for safety measures.
                -Kyle

                Comment


                • #9
                  Re: If i get the NEW DA from meguiars?

                  Originally posted by SX4DUDE2013 View Post
                  I think im gonna get the v2 DA from meguiars (when it comes out).....can i get pads from anywhere? local auto paint shop? they sell alot of 3m....are pads (if there the same size) universal????
                  Just so you know, the W68DA backing plate that comes with the G110v2 is probably going to be too large if you plan on using Lake Country pads. If you're going to order our G110v2 anyway, why not order the pads you need to get started at the same time?
                  Michael Stoops
                  Senior Global Product & Training Specialist | Meguiar's Inc.

                  Remember, this hobby is supposed to be your therapy, not the reason you need therapy.

                  Comment


                  • #10
                    Re: If i get the NEW DA from meguiars?

                    I agree 100% with Michael on getting the 2.0 pads with your machine. These pads are easily cleaned by tossing them in the washer/dryer. I'm not sure about other brands being able to go through the washer/dryer?
                    Barry

                    Comment

                    Your Privacy Choices
                    Working...
                    X