Couple Of Questions For Ya Guys

[cm2005300]

so when spring gets here (hopefully sooner then later) im going to buy the megs dap and a whole bunch of pads also was looking at getting one of the specials

http://www.autodetailingsolutions.com/Porter%20Cable%20Specials.htm

anyway i just had a few questions about the pads themselves of course

what types of pads should i use with #80 and #83 because i really want the dap for swirl removal

what type should i get to apply cleaners and polishes such as color x and deep crystal cleaners?

and what type for wax removal?

also what is the best way to clean them or could i just keep one for each product dedicated and then once that one gets used just throw on a new one

any help would be great thanks!!!- chris

[Andy M.]

Re: Couple Of Questions For Ya Guys

Hey cm2005300,

You can start by checking here:

http://meguiarsonline.com/forums/showthread.php?t=2524

Hope this helps a little
Andy
101impala

[cm2005300]

Re: Couple Of Questions For Ya Guys

perfect thanks

[Andy M.]

Re: Couple Of Questions For Ya Guys

If you have anything else just let us know.

Glad to help.
Andy
101impala

[brickyardz]

Re: Couple Of Questions For Ya Guys

That chart is a good reference but it is a little out of date and there are new products not listed. For the most part, if your using any kind of DA polisher use the W8006 pad to apply all products except any kind of wax, cleaner/wax, polish/wax. For those use the W9006 pad. That will help you with the products not listed.

Some, like #2, Fine Cut Cleaner, were reformulated and although the chart in the link says rotary only, it now can be used with the DA and by hand so a W8006 pad should be used.