Tweet
If the interior is really dusty, like the dashboard.. if it's got tons of **** on it do you wipe it down first with a clean MF to knock off most of the loose stuff or do you immediately use a product like APC sprayed onto a MF?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
Re: If it's really dusty..
lol apparantly I can't write 'C R A P'.. it's a bad word -
Re: If it's really dusty..
I would use APC or QID, whichever was needed, sprayed on a MF towel. Then dress with whichever dressing was wanted.2017 Subaru WRX Premium - WR BlueComment
-
Re: If it's really dusty..
MF towels are the best, you might have to use a couple of them. Just spray a little APC on the towel they are designed to work damp not wet.Comment
-
Re: If it's really dusty..
I always used my vac and put the brush attachment on to get as much dust/dirt as possible.
Sometimes use compressed air along with the vac around edges and hard to reach places before applying a protectant with my micro-fiber.''USE THE LEAST AGGRESSIVE PRODUCT TO GET THE JOB DONE RIGHT''
You Don't Know What You Can Do Until You Try '' TECHNIQUE IS EVERYTHING''
Test Hoods Are Cheap And Most Of The Time Free
Comment
-
Re: If it's really dusty..
Same here. I use the brush because I don't want all of that dust sticking to my MF towels.Originally posted by stang_krazy View Post-James
2012 Chevy Silverado ECSB. Z71 4x4. 5.3
Comment
-
''USE THE LEAST AGGRESSIVE PRODUCT TO GET THE JOB DONE RIGHT''
You Don't Know What You Can Do Until You Try '' TECHNIQUE IS EVERYTHING''
Test Hoods Are Cheap And Most Of The Time FreeComment
-
Re: If it's really dusty..
I dont get it? The towels can be washed, and no dust is blown around?2017 Subaru WRX Premium - WR BlueComment
-
Re: If it's really dusty..
Just the way I do it, use my vac on the carpet and cloth seats so when I'm done I grab the brush and go ahead and get the dash with it so then after that I can apply the #40 and wipe over the dash and the rest of the interior, then clean the windows. Thats my routine.Originally posted by Murr1525 View Post
The way I look at it is, I wouldn't just spray the #40 over a bunch of dust/grim on my dash (like Lelandgray posted about asking what we do? When it's really dusty and has tons of **** on it)or any other and then use a micro-fiber to rub it in or around the surface, to me it just doesn't make sense so thats just my way of doing things!''USE THE LEAST AGGRESSIVE PRODUCT TO GET THE JOB DONE RIGHT''
You Don't Know What You Can Do Until You Try '' TECHNIQUE IS EVERYTHING''
Test Hoods Are Cheap And Most Of The Time FreeComment
-
Re: If it's really dusty..
I wouldnt apply #40 over dirt... I just didnt get the part about keeping the towel clean?2017 Subaru WRX Premium - WR BlueComment
-
Re: If it's really dusty..
I like to use the MF towel dry on the dash first - whether it's very dirty or just for maintenance. It helps to get the dust to stick to the MF towel before getting the dash wet with any product. When I wash them in the washing machine, they come out good as new!-----
Comment
-
-
Re: If it's really dusty..
I always use my vac and brush attachment. You can actually mist Interior Quik Detailer onto the dash and on the console's buttons and then vac the **** out with the brush.
Works awesome and saves towels.www.clean4udetailing.com
Comment
-
Re: If it's really dusty..
Comment
-
www.clean4udetailing.com
Comment
Comment