newbie, please help! please

[Mike Phillips]

Re: Oh my Goodness!

Originally posted by Namirrem
That car is beautiful!!! Such a drastic difference in before/after. Mike, can the clear coat body scrub be used in addition to Scratch-x? Would it provide any additional benefits? TIA.

Hi Namirrem,

Clear Coat Body Scrub can be used by machine while ScratchX is formulated for hand application only.

Cleaning your car's paint twice using two different products with two different application procedures should result in an extra clean, clear and defect-free finish.

Perhaps use the ScratchX by hand first, and then machine clean with the Clear Coat Body Scrub with your Orbital Polisher.

You could always start by trying these two steps to just one section, say half the hood, then inspect your work and see if you like the results. (Inspect the finish after cleaning with just one product, then inspect after cleaning with both products.)

Hope this helps...

Mike

[Mike Phillips]

Originally posted by jan_stang
But just I last question, would I apply MPPC with the orbital just like everyone else with their PC?

Yes, apply with your Orbital Buffer by first applying some product in the shape of an X to the face of your dry bonnet to moisturize the bonnet before starting.

Then, work one section at a time but don't work till the product has become dry, you should always be leaving behind a still wet film.

After cleaning with the MPPC, you should then apply a polish and a wax, or if you want you can skip the polishing procedure and go right to a wax.

Always use a new, clean, dedicated bonnet when switching to a new product.

Mike