I plan on using a PC with the W8006/#83-#80 combo. My question is I have a nic in the paint on my hood up top by the driver side fender from a rock. I also Have a nice chip in the paint on my hood. The black paint seems to be completely gone all I see is white. I should do my BEST to stay clear of these areas when I'm using the combo correct? It could damage the paint even worse?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Question about #83 and nics
Collapse
X
-
Re: Question about #83 and nics
Originally posted by 05BlkAltima
I plan on using a PC with the W8006/#83-#80 combo. My question is I have a nic in the paint on my hood up top by the driver side fender from a rock. I also Have a nice chip in the paint on my hood. The black paint seems to be completely gone all I see is white. I should do my BEST to stay clear of these areas when I'm using the combo correct? It could damage the paint even worse?
How did you get this chip in your paint?.........If you don't mind me asking.r. b.
-
The reason I asked, is because I had a mower sling a rock (or something) into the hood of my wifes Caravan last year, and chipped off a 50 cent size piece of paint down to the primer!
Fortunately my comprehensive insurance repainted the whole hood at no charge to me.
I carry a zero deductible on my comprehensive insurance just for reasons like that.r. b.
Comment
Comment