• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

cool white jetta, need help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by orionz06
    so maybe a burgundy pad or yellow for like an 80 or speed glaze, and a beige for the wax...?
    I would skip the burgundy pad because it can haze the finish......The burgundy pad is more suited for a rotary buffer.

    Buy all the pads that you can afford, as you will need more pads for more products later on.
    r. b.

    Comment


    • #17
      It is basicaly one pad, either hand pad, or pad for DA, and a towel or microfiber to remove per product. Plus the fact that some products can be used on two pads. Between buying new products in the future, and pads eventualy wearing out, you may want a couple extra.

      And then think of how many you will drop on the floor and not want to use again without washing first. If you have the droppises, may want a couple more. I have also heard of peole putting newspaper on the ground around the car, so a drop that stays on the paper can most likely be used safely.
      Last edited by Murr1525; Jun 26, 2005, 12:00 AM.
      2017 Subaru WRX Premium - WR Blue

      Comment


      • #18
        you guys made me get a g100....opened her up today....loving it....im gonna work tonight, and hopefully, i can capture before and after pics.....although the spiderwebbing i had has appeared to lessened after the wax set for a day? make sense?doesnt to me, but hey, less work....i cant wait to do my buddies car....dark purple saturn, neglected for years.....its all mine for a day.....

        and as for pads....

        im getting yellow for 80-83
        beige i think for wax...

        one pad per product, one mf per product and so on....so that leaves me with 2 yellows and a white, and a mf for each...also, i may try the removal bonnett, maybe pick up two and an extra yellow to back it

        Comment


        • #19
          Didnt mean to twist your arm..

          Actualy, your experience with the Nxt wax does make sense. Although the bottle doesnt say it, I think everyone here has found the Nxt looks its best after about 24 hours. And the bottle does say that Nxt will fill in minor swirls. So your swirls are actualy not gone, they were just hidden by the Nxt as it cured.
          2017 Subaru WRX Premium - WR Blue

          Comment


          • #20
            Originally posted by orionz06
            you guys made me get a g100....
            Congratulations, you won't regret it.
            r. b.

            Comment


            • #21
              update....i only had one pad, so i dedicated it to liquid nxt for now.....makes aplication sooooo nice....fills the curves, even application, very little used (well, not very little, proper amount)....i love it, i think just the way it applies product so well, i may save money....one thong i learned though, let it stop spinning on the car..i have a few windows to clean.....

              Comment

              Your Privacy Choices
              Working...
              X