Polishing Pads

[Razor88]

Hello, I am getting ready to order polishing pads and the ultimate bonnets for my 7424 PC. I was just wondering which ones I need for applying ( #80, #21,or NXT ) I just want to make sure I order the right ones. Thanks!!!

[scrub]

there is a three pad set with the following

2 of these (use this for #80)



Soft Buff® Foam Polishing Pads

And one of these (use this for #21)



SOFTBUFFâ„¢ Finishing Pad

The set is $24.95 and should get you started.

[gb387]

Re: Polishing Pads

Originally posted by Razor88
Hello, I am getting ready to order polishing pads and the ultimate bonnets for my 7424 PC. I was just wondering which ones I need for applying ( #80, #21,or NXT ) I just want to make sure I order the right ones. Thanks!!!

- #80 use the 8006 Polishing Pad
- #21 and NXT use the 9006 Finishing Pad

here is a good post that shows pads/speed for the products you use: http://www.meguiarsonline.com/forums...&threadid=2524

You may want to make sure you have a "backing pad" for the ultimate bonnets I use a clean/unused 8006 Polishing Pad. I have read somewhere to use 7006 Cutting Pad it supports the UB better. I have not had a problem with the polishing pad, so I am sticking with it.

[scrub]

[gb387]

scrub... your quick!

[Razor88]

Thanks scrub, That is what I was going to order. I have some but they are not Meguiar's. I am in need of some new ones. Thanks for all you help!!!

[scrub]

Thanks.

gb387, You just made 1300 posts.

Congrats!

[Razor88]

Thanks gb387, and thanks for the link. Very good info,