Re: My Process
1. Wash - Good, do the best you can. Might be able to use your own soap and buckets if you went at an off hour.
2. Clay
3. Clean - DC1 is a good mild cleaner
4. Polish - DC2 is a good pure polish
5. Wax - 2 thin coats of wax is good. There is no reason you cant try the two different products, the worst you will get is a little smearing.
6. Interior - I assume you mean Quick Interior Detailer?
-
Process looks good. May or may not need to clay everytime, and of course any dressings you want to use.
If you are starting to see any swirls you want to fix, you could look into SwirlX, etc. But a mild cleaner is fine for dirt.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
My Process
Hey I know some ppl post up what and how they do what they do.. so I thought I would do it to.. to see what I am doing right and what I am doing wrong, and hece learn, rather than be shelthered
Wash - only availabe through Car Wash (meaning harsh soaps, yeah i know) I still use my Megz Wool Mitt...
Clean Wheels
Dry - Chamois
Inspect the work
Clay Bar the entire car
Apply Megs Step Two process
Apply usually two coats of wax (question - can i apply Megz Nxt and Auto Glym (or other wax with megz)????
Clean All windows inside and out...
Quick Detail
- I do my work under the shade, but no inside as I have no inside..
What am i missing or is this an ok process...???
I dont use scratch x or swril x, and everything is done by hand as i dont trust my self with machines...
Leave a comment: