No SHADE, should I wax?

[ClassicConcepts]

Re: No SHADE, should I wax?

If you want to start with the least aggressive product, would you start with 82? The charts (and bottle) show this as a 3 on the cut meter whereas 80 is a 4. Both are listed as cleaner/polishes, is the difference in the additives that makes 80 better than 82 for this?
I have used both with the DA and don't see any difference, so I use 82 since it is less aggressive.

[yalerd]

Re: No SHADE, should I wax?

If you want to start with the least aggressive product, would you start with 82?

Since you never know until you try, then yes, you would start with M82, but M80 is a more versatile product and to most of the people it gives them the results they are looking for and sometimes the results are better than what they expected.

M82 is a great product but it's better to use in a multi-step process where you would leave M82 to polish to get a perfect finish.

In your experience M82 is giving you good results then like Mike says "Find something you like and use it often", then stick with it.

[akuma84]

Re: No SHADE, should I wax?

Thank fellas. I've decided to use W8006 with M80 and W9006 with GC Liquid Wax. Before I order, what else do I need to get? DA Polisher Backing Plate?

[yalerd]

Re: No SHADE, should I wax?

what else do I need to get? DA Polisher Backing Plate?

The G110 comes with the backing plate so you don't have to worry about that.
Remember a couple of microfiber towels so you can have plenty