You can foam and rinse if it is really dirty.
But when I have my foam gun, I foam a panel, then wash that panel with the mitt, and rinse the mitt. Then next panel.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
352 results in 0.0190 seconds.
-
2025 Porsche Cayenne - DQUARTZ PRO - CQUARTZ Finest Reserve - A Miracle Detailing
2025 Porsche Cayenne - Grey
DQUARTZ Diamond Fusion Ceramic Coating
CQUARTZ Finest Reserve Ceramic Coating
A Miracle Detailing
Inspection:
DeFelsko PosiTest DFT Paint Thickness Gauge for ferrous/non-ferrous metals
DeFelsko 200C3-G PosiTector 200 C3 Advanced... -
I would foam then rinse, then bucket wash myself.Leave a comment:
-
Fiberglass Jeep Top
Posting this in the marine section even though it's a Jeep, the top is fiberglass and the previous owner told me he thought the paint was some kind of epoxy but he wasn't real sure about it.
Anyway the paint is now about 4 years old and sees a lot of Arizona sun. No real terrible oxidation yet... -
I tried a small spot this morning using the Ultimate Compound and the Ultimate wax, it looks pretty good. I'll let the cook all day in the sun and see how it looks tomorrow.
...Leave a comment:
-
M27 and Ultimate Polish produce tiny flakes
I can’t buff them off until I wait a day. The flakes are white and seem to reflect bright light. Am I doing something wrong?
Bill -
It looks like you're right. Waiting longer worked. Thanks!Leave a comment:
-
I used it by hand, a sponge applicator like applying wax, just worked it in. I used hybtid ceramic liquid wax on top. It seemed to hold up nicely. Now I did read on here M27 should be applied to bare, clean paint for best outcome with that product. But M27 applies so easy I don't think it would hurt...Leave a comment:
-
Just one more question.
Can this be used as a base for M27 or will it comprise durability?...Leave a comment:
-
Can I ask how you applied it?
Also, what was the durability of the LSP you used?...Leave a comment:
-
My other issue is those recessed channels, I'll need to be really careful around those that I don't burn thru on an edge. Might have to do those by hand.Leave a comment:
-
Well that's just it, although it's fiberglass, it's painted. So I won't really be applying anything to fiberglass or gel coat but to paint, the only difference is I suspect it's an epoxy marine paint. I'm thinking to just try what I use all the time, the Ultimate Compound followed by the Ultimate Wax....Leave a comment:
-
Hello!Leave a comment:
-
What about Meg's marine waxes? They are made for fiberglass and gel coatsLeave a comment:
Leave a comment: