- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
378 results in 0.0298 seconds.
-
Hi, I am a new member too.
-
Our Hybrid Ceramic Wax Spray is designed to be used in a very particular manner along with water towards the end of the washing step. So yes, your application likely will not perform as well and in future could even leave streaks behind. Sounds like you would be much better off with our Hybrid Ceramic...Leave a comment:
-
Nice garage setup! Really like that floor!Leave a comment:
-
What is the disadvantage of just applying the Hybrid Ceramic Spray to the clean paint as you would use any other wax?
I just detailed my car with a 10 year old paint (protected with your ultimate liquid off and on), using your Clay Bar (after washing), 3000 grit sponge on some paint oversprays...Leave a comment:
-
To remove the Rainx residue, use a citrus-based glass cleaner like Invisible Glass. Apply it with a clean microfiber towel and wipe in a circular motion. For stubborn spots, try a non-abrasive glass polish or clay bar. Rinse with water and dry with a fresh towel to ensure all residue is gone.
...Leave a comment:
-
Really looking forward to purchasing this....Leave a comment:
-
Meguiar's Heavy Duty Trim Restoration Kit
Meguiar's Heavy Duty Trim Restoration Kit - 2025 New Product
- Restores dull, faded grey or black trim to a like-new look!
- This truly heavy-duty trim restoration kit combines a unique deep cleaning trim scrub to remove embedded stains and deposits with an ultra-durable trim shield for
-
advice for really bad etching
as you can see in the picture it's bad. this is after decontamination. I used d300. it looked on for a day or two and then looked like that again after whatever fillers wore out. you could still see little pits and some outlines of the water marks after d300 with mf pads on a da. tried m300 still...You may only view thumbnails in this gallery. This gallery has 1 photos. -
For severe etching like that, moving to a more aggressive approach might be necessary if you've already tried D300 and M300 without satisfactory results. M105 paired with a cutting pad can sometimes reduce the appearance of deeper imperfections, but it sounds like you may need to consider wet sanding...Leave a comment:
-
Looking forward to using this. I’m a retiree working part time at Advance Auto delivering parts. My van is a little Dodge Pro Ram I call “the hornet “ This will be perfect for keeping the hornet clean.Leave a comment:
-
Makita XOP02T18V 5.0 Ah DA
Makita XOP02T 5”/6” 18V 5.0 Ah Cordless Orbital
I just bought this polisher trying to figure out which pads I need for what I need to do. I have a 2023 Tesla pearl white, which has multiple coats. I guess they’re known to have thin paint.
I don’t need to do any paint... -
The Makita XOP02T is a great choice! For a Tesla with thin paint, you'll want to stick to softer pads to avoid any risk of cutting into the clear coat. Since you're looking to remove fine scratches and clean up surface contaminants, I'd recommend a light polishing pad, like a foam finishing pad, paired...Leave a comment:
-
Another one gone. I really think a dedicated catagory here to let the Megs enthusiasts know so they can stock up would be a great idea.Leave a comment:
-
Just called the solutions hub. M2611 paste wax is discontinued. Just the liquid now. Franco...Leave a comment:
-
Hey Nick, sorry to ask this question again. I have been having a hard time locating M26 paste wax. Is this discontinued? I was lucky enough to find 2 tins. Thanks Nick. FrancoLeave a comment:
Leave a comment: