• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Do I wash the car after swirl remover and before polish and wax?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Do I wash the car after swirl remover and before polish and wax?

    I've just done:

    1. Wash
    2. Smooth Surface Clay
    3. Swirl Remover 2.0

    I'm planning to do an additional polish and then top it off with Ultimate Liquid Wax.

    Should I wash my car after the 3rd step, before polishing?

    I see tiny bits of residue left from the Swirl Remover and I just want to make sure that it's all completely gone, thus the reason for wanting to wash it.

    The car wash I use is a cheapo ArmorAll "Wash n Wax".

    Will that have any effect on the bonding of Ultimate Liquid Wax seeing as the car wash shampoo has traces of Wax already in it?

  • #2
    Personally after doing that, I would just keep on going with the polish and wax. If you are going to wash, maybe invest in a more reputable car wash soap like something from meguiars, and make sure you use a good microfiber wash mitt. You don't wanna mess up what you just did. Bottom line, just go ahead and polish!
    Always searching for the best.... Keep it country!
    ---------
    SkiDoo Snowmobiles!

    Comment


    • #3
      Re: Do I wash the car after swirl remover and before polish and wax?

      A good idea is to go ahead and wipe the car down with a quick detailer, instead of washing.

      Comment


      • #4
        Re: Do I wash the car after swirl remover and before polish and wax?

        "I" normally go straight to LSP after #9. "I" only (sometimes) wash the car after #83 or (UC) because of the dust, then #9 or UP and finally LSP.

        Comment


        • #5
          Re: Do I wash the car after swirl remover and before polish and wax?

          I ended up quick detailing it and then LSP. Turned out quite nicely.

          Comment


          • #6
            Re: Do I wash the car after swirl remover and before polish and wax?

            Originally posted by I CU2 View Post
            I ended up quick detailing it and then LSP. Turned out quite nicely.
            M34 Final Inspection is neutral and it won't add anything unwanted before you apply your protecting product.

            Comment


            • #7
              Re: Do I wash the car after swirl remover and before polish and wax?

              What's M34 :l

              Comment


              • #8
                Re: Do I wash the car after swirl remover and before polish and wax?

                Originally posted by I CU2 View Post
                What's M34 :l
                M34 Final Inspection is body shop safe quick detailer. Great for cleaning paint before application of polishes/ waxes. It can also be used as a clay lubricant.

                Comment


                • #9
                  Re: Do I wash the car after swirl remover and before polish and wax?

                  I used the quick detailer that came in my smooth surface clay pack - it should be fine though, right?

                  Comment


                  • #10
                    Re: Do I wash the car after swirl remover and before polish and wax?

                    Originally posted by I CU2 View Post
                    I used the quick detailer that came in my smooth surface clay pack - it should be fine though, right?
                    Yes, Quik Detailer is fine.

                    M34 Final Inspection can be used on fresh paint as well.

                    Comment


                    • #11
                      Re: Do I wash the car after swirl remover and before polish and wax?

                      You can also do an isopropyl alcohol wipedown. Dilute it about 10:1 with water and wipe down with a microfiber -- this will ensure that the surface is very clean and ready for wax.

                      Comment

                      Your Privacy Choices
                      Working...
                      X