Tweet
Does DC3 have any cleaning abilities? Or is that what DC1 and DC2 are for? Can this wax be used for layering? Thanks!
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: DC3 Cleaning
DC3 is a pure wax and DC2 is a pure polish. So neither of those have cleaning ability. That would be DC1's job.
And yes, you can use it for layering. -
Re: DC3 Cleaning
^ +1
DC1 cleans, DC2 is pure glaze/oils to nuture and give wet-look, DC3 is pure carnuba polish.
DC1 is being discontinued, SwirlX is a good "replacement" paintCleaner (it also incudes some glaze/oils).
Also, you cannot actually "layer" wax (increase the thickness with many coats) regardless of what other websites/forums say. You can apply 2 coats of the same wax to ensure complete and uniform coverage. You can apply a 2nd coat with a different wax and end up with a mix of the waxes, X% of the first and Y% of the second, giving a mix of their properties. Many folks (myself included) do this, commonly a pure carnuba (such as DC3 or #26) ontop of sealant (such as NXT2 or #21). You dont want to use any sort of cleanerWax (such as ColorX) as the 2nd coat since it would remove the 1st coat, but your DC3 is a good candidate.2010 XRSComment
-
Re: DC3 Cleaning
Thanks!Comment
Comment