• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Using NXT 2.0 after #7/#26 Process

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Using NXT 2.0 after #7/#26 Process

    Kinda new the Meg's line but after having my car done with Meg's Professional products by a forum member, I was wondering if it would be okay to apply one or more coats of 2.0 after doing a #7/#26 process?

    If not, what product should follow #26?

    TIA.
    Tags: None
  • #2
    Re: Using NXT 2.0 after #7/#26 Process

    You can use whichever you like....

    You can stick with the #26, or use a coat of each.

    Or just go from #7 to two coats of Nxt.
    2017 Subaru WRX Premium - WR Blue

    Comment

    • #3
      Re: Using NXT 2.0 after #7/#26 Process

      I wouldn't use NXT 2.0 after #26. NXT 2.0 has light cleaning properties and so it will probably take some of the #26 off. I like to put NXT 2.0 on first and top it with #26. It's my favorite combo!

      ColorX, NXT 2.0 and M26 on a 1996 Ford Explorer




      NXT 2.0 and M26 on 1995 Oldsmobile Cutlass Ciera SL
      Shane
      1995 Oldsmobile Cutlass Ciera SL

      If you trim yourself to fit the world you'll whittle yourself away. - Aaron Tippin

      Comment

      Previous template Next
      Your Privacy Choices
      Working...
      X