Re: gold class trim detailer
When I was testing it and put it on my mirror, it did seems to last quite a bit.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
gold class trim detailer
Collapse
X
-
Re: gold class trim detailer
Originally posted by imacarnut View Postthough it won't offer as much protection as the trim detailer, i've been using the ultimate quik wax on my black plastic side mirrors, etc., and it does a good job of darkening and making them look good...
Leave a comment:
-
Re: gold class trim detailer
Depends where you live, be sure to check the mom and pop auto stores, our Target doesn't have it (Medford, OR).
Go to the Meguiars.com and look see who carries the consumer labled stuff and start crusing or calling around.
Meguiars.com Dealer Locator
We have Bi-Mart's here in the No. West and they carry it.
ADS carries it too.
Leave a comment:
-
Re: gold class trim detailer
i have never seen GCTD in stores. The closest thing i've found to GCTD is GC Vinyl/ Rubber Protectant.
Leave a comment:
-
Re: gold class trim detailer
Originally posted by mr.haributo View PostBesides online, where you can buy GCTD? It wasn't at WalMart or Kragen and I doubt Target carries it.
Leave a comment:
-
Re: gold class trim detailer
though it won't offer as much protection as the trim detailer, i've been using the ultimate quik wax on my black plastic side mirrors, etc., and it does a good job of darkening and making them look good...
Leave a comment:
-
Re: gold class trim detailer
Besides online, where you can buy GCTD? It wasn't at WalMart or Kragen and I doubt Target carries it.
Leave a comment:
-
Re: gold class trim detailer
Originally posted by Kooz View PostInteresting. I happen to have a little bottle of cleaner wax from a Smooth Surface Clay Kit. I was wondering what I was going to do with that little bottle. Nice idea. I will give it a try, and some PlastX.
Leave a comment:
-
Re: gold class trim detailer
The problem with those rubber pieces (exterior window seals?), or rubber in general, is that you can't do a whole with them. Just have to kind of go with it. I have them underneath my windows, and I find IMO they look best when they are cleaned, but not really dressed; or dressed and then re-wiped with a clean cloth to remove excess.
Leave a comment:
-
Re: gold class trim detailer
On my car, there is those rubberish trim pieces above the doors. THey look quite bad, and the car is new. THey don't even improve much after gold class trim detailer. Is this the correct product for that type of trim?
Leave a comment:
-
Re: gold class trim detailer
Hey, new to the forums but old to Meguiars products.
I used to use the trim detailer on a 96 BMW M3 that I had. I would usually apply it with a 1" foam brush (from the hobby store) the night before I would detail the car. I'd let it sit all night long in the garage (I'd also detail the interior the night before and let the leather and plastic sit after being treated and then wipe the the interior down again in the morning). Then I'd wash the car as I would normally do. I felt like I was cleaning off any excess and it didn't streak like it would if I applied the trim detailer after washing (in hind sight I was probably applying way too much).
That would usually to the trick because I wouldn't need to reapply the trim detailer for another 3 months and I wouldn't get the streaking. I'm sure that goes against all recommended usage procedures, but it worked for me.
I haven't tried the trim detailer on our 08 Honda Element yet so we'll see how that plastic needs to be treated.
Leave a comment:
-
Re: gold class trim detailer
I use a toothbrush to apply the GC trim detailer. It not only seems to work it in better, but it also removes any "stuff". I originally bought a bottle when I bought my car to try to remove wax residue from my cowl cover and mirror trim (00 Mustang). Because I was trying to remove the wax with it, I figured a toothbrush would help get it out of the "pebble" surface-and it did. I couldn't believe the difference in the treated portions vs the untreated portions. I tried using make up pads as applicators and wiping off the excess, but found that working it in with the toothbrush (I use soft children's brushes, so they don't scratch) works better. It lasts longer, and I've never had it run-even on my DD's trim (the Mustang isn't a dd and has a garage spot-the DD doesn't get garaged).
Leave a comment:
-
Re: gold class trim detailer
A DA polisher would be too much of a hassle...
Just put a little passion behind the pad!
Leave a comment:
-
Re: gold class trim detailer
Ok Thanks roushsatge2.
I'm just thinking maybe it would give more amazing result on faded trim.
Leave a comment:
-
Re: gold class trim detailer
Suppose you could, but it would probably be more of a hassle than just doing it by hand.
Leave a comment:
Leave a comment: