Tweet
Very interested in picking up this system. Once the finishing wax is applied, is there a cure time, or can I immediately top it with something like #20?
Thanks.
Thanks.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Question on DA System
The wax would have the usual recommendation of 15 minutes minimum, 12-24 hours for best looks.
However, it is worth noting that #20 is a cleaner/wax, so you would just be cleaning the paint again and removing your previous wax.2017 Subaru WRX Premium - WR Blue -
Re: Question on DA System
The microfiber system is great and produces fantastic results in 2 steps. You should leave the wax setup minimum 15 minutues but preferably longer.
You can top it with GCCP or ULW. GCCP will give you more depth.Practice doesn't make perfect, the dedication to achieve perfection makes perfect. "Smack"
2011 Jet Black 328i Touring
2007 Jet Black 335i SedanComment
-
Re: Question on DA System
Just so you know, M20 is a light cleaner wax so it's going to remove a fair bit of the DA Finishing Wax as you apply it. That's not necessarily a bad thing, we just wanted to make sure you're aware of it, is all. But you should be able to apply any other wax within a few minutes of applying D301.Michael Stoops
Senior Global Product & Training Specialist | Meguiar's Inc.
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
Comment
-
Re: Question on DA System
Thanks everyone!Comment
-
Re: Question on DA System
One other question...I decided not the purchase the finishing wax. I have really hard VW paint. I feel 205 on foam polishing pad would be a great final polish even though it might not even be needed. Thoughts on this? Good plan?Comment
Comment