• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

What is the best dilution for APC+ to clean brake dust?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • What is the best dilution for APC+ to clean brake dust?

    What is the best dilution for APC+ to clean brake dust? My wheels are clean every few weeks so there is not a ton of brake dust, but is 10:1 sufficient or is something like 4:1 better or is that too much?

  • #2
    Re: What is the best dilution for APC+ to clean brake dust?

    10:1 is pretty good if you wash your wheels regularly....I went thru a few 10:1 & 4:1 full spray bottles and did not really notice the 4:1 dillution being better....but my wheels are fairly clean...
    "STRIFE" aka Phil
    2005 Infiniti G35 Coupe (IP/ aka White) the Toy
    2011 Subaru Impreza (SWP/ aka White) the DD
    2017 Subaru Forester (CWP/ aka White) Wifey's

    Comment


    • #3
      Re: What is the best dilution for APC+ to clean brake dust?

      I've had good results from 4:1 on light build-up on clear-coated rims, but I wax my wheels every month, and wash my car at least weekly, so I've never had any difficulty using regular car wash soap to clean them.

      Comment


      • #4
        Re: What is the best dilution for APC+ to clean brake dust?

        If your cleaning your wheels weekly I would imagine soap & water would be just fine.
        Nick
        Tucker's Detailing Services
        815-954-0773
        2012 Ford Transit Connect

        Comment


        • #5
          Re: What is the best dilution for APC+ to clean brake dust?

          I just use some dawn and a brush, it works well enough. 10:1 APC should be fine unless its really caked on.

          Comment


          • #6
            Re: What is the best dilution for APC+ to clean brake dust?

            After using APC at a dilution ratio of 10:1 on alloy wheels, should I apply a coat of wax again?
            Does the APC strip the wax off the wheels?

            Comment


            • #7
              Re: What is the best dilution for APC+ to clean brake dust?

              Originally posted by gtrspeed View Post
              I've had good results from 4:1 on light build-up on clear-coated rims, but I wax my wheels every month, and wash my car at least weekly, so I've never had any difficulty using regular car wash soap to clean them.
              How can some of you guys wax your wheels every month? I can't imagine doing that to my 3 piece mesh design rims; getting between the spokes and the rivets.

              Comment


              • #8
                Re: What is the best dilution for APC+ to clean brake dust?

                Well, these are my wheels...



                They're relatively easy, though I don't do the barrels.

                Comment


                • #9
                  Re: What is the best dilution for APC+ to clean brake dust?

                  Now try imagining waxing these every month

                  Comment


                  • #10
                    Re: What is the best dilution for APC+ to clean brake dust?

                    Heh. That looks more than a little challenging. AG sells foam finger pockets that make applying wax on wheels easier - you might want to look into them. They're great for getting into nooks and crannies without worrying about dropping your applicator pad.

                    Comment


                    • #11
                      Re: What is the best dilution for APC+ to clean brake dust?

                      I usually use wheel brightener, but on rims with polished lips i go 4:1 APC, light aggitation and then foam them along with the rest of the car.
                      The only thing you have to remember when doing it this way (all 4 wheels without rinsing), is that APC can dry out quick on hot wheels, and this will mean that the dirt that has come loose will re-settle. So keep moist!
                      Arctic Detailing - Northern Norway
                      Facebook site http://www.facebook.com/home.php?#!/...12239962147393

                      1996´AUDI S6 AVANT QUATTRO
                      00`S6 tip 92´S4q, 97´S6q, 97´A4q, 02´A4q, 76´ Audi50

                      Comment


                      • #12
                        Re: What is the best dilution for APC+ to clean brake dust?

                        I usually use wheel brightener, but on rims with polished lips i go 4:1 APC, light aggitation and then foam them along with the rest of the car, or wash with shampoo.
                        The only thing you have to remember when doing it this way (all 4 wheels without rinsing), is that APC can dry out quick on hot wheels, and this will mean that the dirt that has come loose will re-settle. So keep moist!
                        Arctic Detailing - Northern Norway
                        Facebook site http://www.facebook.com/home.php?#!/...12239962147393

                        1996´AUDI S6 AVANT QUATTRO
                        00`S6 tip 92´S4q, 97´S6q, 97´A4q, 02´A4q, 76´ Audi50

                        Comment

                        Your Privacy Choices
                        Working...
                        X