Tweet
On softer paints, I can finish out very nicely using M205 via rotary (black CCS pad), but I can't reproduce this using my Flex. I can get an OK finish, but in certain light (especially with my Surefire LED) it can look hazy. Any tricks to getting a perfect finish with the Flex? I get similar results using my PC 7424 also. Thanks in advance.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Trick to finishing out perfectly using Flex and M205?
It might just be the action/motion of the machine. I prefer finishing with a rotary over the FLEX for that very reason.
I think the FLEX and M105 can be a great combo for heavy correction work without introducing swirls, but the FLEX isn't my favorite for final polishing.
That said, there are ways to modify technique including work time, pressure, work area size and pad selection. Give those some consideration and test out changes.
Comment