HyperDressing OSHA Compliant Bottle

[o_einstien]

I got my HyperDressing today along with OSHA compliant bottle 32oz.
I know the dilution ratio for different types of gloss. I saw the dilution marking 1:1 , 2:1, 3:1 and 4:1 on the bottle. I am confused how this works. Can somebody explain how to prepare diluted hyperdressing using this bottle. Thanks.

[Mike Phillips]

Hi o_einstien

We don't have a picture of the Hyper Dressing bottle and dilution, but I'll try to show you with the Super Degreaser bottle.



First you fill the bottle with water to the dilution level you want. In the below example we have chose 4:1 and the 4:1 is circled. That's the line/level we filled the empty bottle to with water. Where the line is pointing to a seam in the plastic is where you're going to add water for all products that you dilute.



Next, you add your product till you reach the seam or ridge where the finger is pointing,



Then you shake that bottle vigorously until you have completely mixed the water with the Super Degreaser.

[o_einstien]

Thank you Mike for very clear explanation .

[n2_space]

Finally, thank you for a proper and very detailed answer Mike!

I had finally resorted to pouring water in an APC bottle and measuring the amount to figure out where the water should be added to for the proper dilution ratios.

[MrCLRider]

Re: HyperDressing OSHA Compliant Bottle

are these bottles truely the correct dilution amounts, as compared to something that I would get at lets say Lowes or Home Depot?? those bottle, 32oz, say to fill to the dilution line of your liking, and then fill to the top of the neck... Has anyone else purchased bottle outside of megs bottles for their product? I think i'm just going to start buying all Megs spray bottles to not have to worry about it, i do want it to be right if I'm spending that much money on stuff.

[Murr1525]

Re: HyperDressing OSHA Compliant Bottle

They look about right, but I agree that I would like to see it on the bottle, not on a sticker that could be misaligned.

I have never actualy taken an empty one, and put in 10 parts to see if the sticker line is close.

[Mike Phillips]

Re: HyperDressing OSHA Compliant Bottle

are these bottles truely the correct dilution amounts, as compared to something that I would get at lets say Lowes or Home Depot??

Yes.

[MrCLRider]

Re: HyperDressing OSHA Compliant Bottle

well heck, now I am going to have to redo all my bottle that I have, or just buy all new Megs bottles. That is going to drive me crazy when I look at those bottles I have knowing it probably isn't the correct dilution.

[Ivan Rajic]

Re: HyperDressing OSHA Compliant Bottle

well heck, now I am going to have to redo all my bottle that I have, or just buy all new Megs bottles. That is going to drive me crazy when I look at those bottles I have knowing it probably isn't the correct dilution.

Just add a little water to make sure and you'll be safe/fine.... I always use other bottles that have the volume marks on the side... pour 24oz. of water then 6 of HD and you're good to go for your 4:1.

[Murr1525]

Re: HyperDressing OSHA Compliant Bottle

well ****, now I am going to have to redo all my bottle that I have, or just buy all new Megs bottles. That is going to drive me crazy when I look at those bottles I have knowing it probably isn't the correct dilution.

How did you do yours with the Lowe's bottles?

It might not be wrong....