D151 - PRC...Now available in the U.S. !!!

[Mike Pennington]

Re: D151 - PRC...Now available in the U.S. !!!

May not be loaded yet ??

Let me pass along to that Department

[Mike Pennington]

Re: D151 - PRC...Now available in the U.S. !!!

Update....

Give them till about 10:45 am pst today.

Then it will be available

[ronniejay]

Re: D151 - PRC...Now available in the U.S. !!!

AJ Foyt PBE, in Houston knows nothing about this product. They have other megs stuff. Are they too low a volume dealer to have it?

[Blake Beamish]

Re: D151 - PRC...Now available in the U.S. !!!

AJ Foyt PBE, in Houston knows nothing about this product. They have other megs stuff. Are they too low a volume dealer to have it?

The dealers listed on the first post are the only ones that will be handling this product.

[Tom Weed]

Re: D151 - PRC...Now available in the U.S. !!!

Ok Tim. I'm in!

I just don't want to top an all in one with something else. Defies the point.

I'll go for it. If I can get close to 45 days out of it....with me washing it.....I'll be happy.

Justin,
have you used #66 or Optimum Polyseal for an AIO? Reason I ask, I've used both of these products, but never really had the opportunity to monitor their durability. I will usually end up topping them with something, It would be nice to do a side by side comparison on the three to see their cutting/cleaning ability, ease of use and durability. I got a gallon of 151 yesterday, so I am wanting to give it a shot soon.

[TimG]

Re: D151 - PRC...Now available in the U.S. !!!

Update....

Give them till about 10:45 am pst today.

Then it will be available

Thanks Mike. I'll update if its still not there. Thanks again

Tim
ps yes I've registered my email to see the MSDS

[Tom Weed]

Re: D151 - PRC...Now available in the U.S. !!!

I just used on a black vette that has been repainted, the paint is super sensitive to scratching and hazing. I used a white cross cut, then green, then blue and finally a black pad, all are in the order of agressiveness. I used the Flex VRG and I did a side by side against Polyseal. Same test with each product in a 2x2 area and removed, the 151 showed slight hazing on the soft paint even with a finishing pad. The Polyseal didn't have as much correction ability, but finished out glossier.

I dont' have my camera to take pics right now, but I am doing a lighter colored vehicle this weekend, will do another side by side on what I would assume is harder paint.

Tom

[Duneroller]

Re: D151 - PRC...Now available in the U.S. !!!

Got a gallon of D151 last night. Hope to try it out this weekend.

[Justin Murphy]

Re: D151 - PRC...Now available in the U.S. !!!

Justin,
have you used #66 or Optimum Polyseal for an AIO? Reason I ask, I've used both of these products, but never really had the opportunity to monitor their durability. I will usually end up topping them with something, It would be nice to do a side by side comparison on the three to see their cutting/cleaning ability, ease of use and durability. I got a gallon of 151 yesterday, so I am wanting to give it a shot soon.

Poli-Seal lasted on 4 vehicles an average of 4-6 weeks with bi-weekly washings. It filled a lot too. I never got a chance to use #66 but I've used Poorboy's Polish with Sealant (a non-abrasive but cleans like no other!) and XMT's 360 (has abrasives). PwS last about 2-3 months. It's correction is limited to pad selection but it cleans so well.....I think this is why it lasts so long.

[Sal329]

Re: D151 - PRC...Now available in the U.S. !!!

My luck, wish my local distriubutor could get some

[TimG]

Re: D151 - PRC...Now available in the U.S. !!!

Just to chime in, the MSDS has been uploaded. Best part, Tim Larson @ Meguiars email them to me - great customer service!

Tim