practical: how do you dilute your Hyperwash?

[Murr1525]

Re: practical: how do you dilute your Hyperwash?

hyperwash is dulted 400:1 right, they claim thats 1 ounce per gallon.

1 ounce per gallon is 128:1, which is the dilution ratio for every other soap.

I do not have a bottle in front of me, but I doubt the instructions would be that far of....

Plus, no one fills a 5 gallon bucket to the top, so at most 4.5 gallons equals about 576 ounces of water, which gives about 1.5 ounces of soap at most. Using just one ounce or one pump seems close enough...

[Superior Shine]

Re: practical: how do you dilute your Hyperwash?

I always get the pump with a gallon. And we use it with awesome results.

[d.mopar]

Re: practical: how do you dilute your Hyperwash?

I just fill up a bucket with 4.5 gallons of water ,take the gallon for Hyper Wash give it a pump and continue filling the bucket with water for the suds.

Andrew

the gallons no longer come with a pump. i guess meguiars thinks they did something cool i dont know. hyperwash is dulted 400:1 right, they claim thats 1 ounce per gallon. well do the math, no its not. 400:1 is only about 3. why claim 1 oucne of hyperwash per 5 gallons of water, doesnt make sense. ive uesed hyperwash once and recieved horrible results.

[J. A. Michaels]

Re: practical: how do you dilute your Hyperwash?

A full stroke of the pump is one ounce if my memory serves me. If you did not get the pump. I would suggest a cheap plastic measuring cup. Pour in a ounce and your set.

[onawrxhigh]

Re: practical: how do you dilute your Hyperwash?

Hyper comes with a pump. One pump per 5 gallon bucket.

I just fill up a bucket with 4.5 gallons of water ,take the gallon for Hyper Wash give it a pump and continue filling the bucket with water for the suds.

Andrew

[Executive Detailing]

Re: practical: how do you dilute your Hyperwash?

Huh, me neither.......

[Joenok]

Re: practical: how do you dilute your Hyperwash?

hm, did´nt get the pump... would have been easier...

[Superior Shine]

Re: practical: how do you dilute your Hyperwash?

Hyper comes with a pump. One pump per 5 gallon bucket.

[Joenok]

Re: practical: how do you dilute your Hyperwash?

1 gallon is 3,78 litres, so i suppose you´re right...

[Sydster]

Re: practical: how do you dilute your Hyperwash?

If my calculations are right 10ml for every gallon of water, this is how i use it. I have a measuring spoon for the 10ml of hyperwash then add a gallon of water for every spoon of hyperwash in a bucket.

[Joenok]

Re: practical: how do you dilute your Hyperwash?

bump!

[Joenok]

I know the rate is 1:400, but how do you do it, do you "predilute"?..
I was thinking of diluting 10:1 first, and then take it from there.
Hard to get the mix right straight in the bucket, i presume..