Meguiar's Ultimate Fast Finish

[pwaug]

Re: Meguiar's Ultimate Fast Finish

Nick--is the durability of of UFF impacted by the Wax or Sealant used under the UFF?

[Don]

Re: Meguiar's Ultimate Fast Finish

what is the feeling on doing double coats of fast finish i just slapped a coat on. if we do a double coat how long should we wait in between coats?

I assume you'll get a multitude of answers depending on how the responder feels about "layering." Some will say that you will just remove the 1st layer and others will say you are just making sure you have complete & even coverage.

I fall into the latter. I don't believe there will be any "thickening" of the UFF coating, rather I think that you will just even up the low spots & missed areas so you will have a consistent layer of UFF on the entire surface of the car.

I also believe that if you wanted to do a 2nd application, you should wait 24 hours, so you don't remove any of the previous layer since like dissolves like, and if the first layer isn't 'cured' you may just be removing it by applying more UFF.

This is just my opinion, maybe one of the other more experienced guys will jump in.

[MicrofiberMan]

Re: Meguiar's Ultimate Fast Finish

what is the feeling on doing double coats of fast finish i just slapped a coat on. if we do a double coat how long should we wait in between coats?

[The Guz]

Re: Meguiar's Ultimate Fast Finish

For those interested in this product I gave it an initial review.

Review - Meguiar's Ultimate Fast Finish

[Murr1525]

Re: Meguiar's Ultimate Fast Finish

I ordered on Amazon, we'll see when it gets here.

[The Guz]

Re: Meguiar's Ultimate Fast Finish

Right now I am looking at the "Meguiar's Direct" web page. Product not listed there for sale. How do I get it?

I got mine on Autogeek. Or wait until it hits store shelves in February sometime.

[DogParkGuy]

Re: Meguiar's Ultimate Fast Finish

Hi BTLew81,

Sorry for the late response.

Yes, Ultimate Fast Finish can absolutely be used over & in addition to your existing LSP. In fact we are recommending if you are looking to maximize gloss & the best protection we offer, the ideal combination now would be to polish, wax, and then Ultimate Fast Finish.

In case anyone didn't know, it is available now!

Right now I am looking at the "Meguiar's Direct" web page. Product not listed there for sale. How do I get it?

[The Guz]

Re: Meguiar's Ultimate Fast Finish

Mine just showed up

[Chop]

Re: Meguiar's Ultimate Fast Finish

Yes. See Nick's comment

thanks! must have missed that reply yesterday when I went over the thread. Looks like I will be trying this new product once the rain/weather cooperates. My bottle of NXT2.0 is almost gone and I never got to try the ULW.

[The Guz]

Re: Meguiar's Ultimate Fast Finish

So if one wanted to KISS (Keep it Simple) and only use 1 product ..... this would be your longest lasting /best protection offered in Meguiar's line of "waxes" and dethroning Ultimate Liquid/Paste Wax?

Yes. See Nick's comment

Ultimate Fast Finish is brand new chemistry and is not derived off of any existing product. Once available, it will be Meguiar's most advanced synthetic polymer protection technology we offer.

[Chop]

Re: Meguiar's Ultimate Fast Finish

So if one wanted to KISS (Keep it Simple) and only use 1 product ..... this would be your longest lasting /best protection offered in Meguiar's line of "waxes" and dethroning Ultimate Liquid/Paste Wax?

[Nick Winn]

Re: Meguiar's Ultimate Fast Finish

If I apply in my garage what is the coldest temperature I can apply Ultimate fast finish? I am hoping that it will be easier to apply in cold weather than a wax or sealant.

The lowest temperature we recommended is 55 degrees Farhenhit.

[RonDee]

Re: Meguiar's Ultimate Fast Finish

If I apply in my garage what is the coldest temperature I can apply Ultimate fast finish? I am hoping that it will be easier to apply in cold weather than a wax or sealant.

[Nick Winn]

Re: Meguiar's Ultimate Fast Finish

Nick, I'm not sure I've gotten a 100 percent answer. Can this be used over ultimate past after it's cured, or should this only be used as a standalone? Thanks!

Hi BTLew81,

Sorry for the late response.

Yes, Ultimate Fast Finish can absolutely be used over & in addition to your existing LSP. In fact we are recommending if you are looking to maximize gloss & the best protection we offer, the ideal combination now would be to polish, wax, and then Ultimate Fast Finish.

In case anyone didn't know, it is available now!

[BTLew81]

Re: Meguiar's Ultimate Fast Finish

Nick, I'm not sure I've gotten a 100 percent answer. Can this be used over ultimate past after it's cured, or should this only be used as a standalone? Thanks!