Detailing a bass boat

[LelandGray]

My boss has a 20' bass boat that I offered to detail for him. It's 12 years old, but he keeps it covered/garaged all the time and it's always cleaned well. He is anal about it's maintenance and always gets asked about his "new" boat.

I'm guessing I don't need to do much to it, but here's what my plan is.

Wash with #54, followed up by #49 oxidation remover, #44 color restorer, then #63 flagship wax. Sound like a good plan??? Or should I skip the #44 and use #45 instead? The hull is white and the sides/top is metallic red. For the vinyl areas I'll probably get some #57.

This will be my first boat detail, so I'll have to buy some product. I'll be using a G110v2. I'll be doing the trailer, too...

[Ash Erickson]

Re: Detailing a bass boat

First things first!

Bass boats can be a bit tricky as some manufactures can use automotive clears in some applications. Best to do a little research before as it can sometimes be very difficult to tell the difference and this will ultimately dictate the products that you do use. Below is what I would recommend for a gel coated application.

From what you are describing it sounds like the boat is in good condition with little to no oxidation. With that said, you would not need to use the # 49 and # 44 together as they are both “Cleaners”. Best to evaluate the finish, then chose the least aggressive method to achieve the best results which in this scenario would be the # 44 Color Restorer.

This product works wonderful on metal flake and standard white/colored gel finishes that are dull and in need of “light” cleaning. However, if you find areas that have oxidation or defects that # 44 will not remove, and this may be the case on the non metal flake areas, then best to step up the aggressiveness to # 49 or # 67.

Now, due to the fact that this boat has some metal flake, we highly recommend the # 45 and the # 63 for the ultimate shine and protection.

As for the vinyl, # 57 is a great way to go however, if you find that you need deeper cleaning action # 39 or APC will be a great first step followed by # 57 or the Flagship Vinyl Protectant.

Trailers are usually easy as most fresh water ones are either painted or powder coated. I find that quick once over with #50 usually does the trick.

You are on the right track and with a little elbow grease; the boat should look even more amazing!

Good Luck!

[LelandGray]

Re: Detailing a bass boat

Awesome! thanks Ash!