• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

meguiars #91...

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    meguiars #91...

    marine/r.v does this stuff really buff out 1000 grit sanding scratches in marine gel-coat?

    Or do you suggest sanding with 1200 grit paper?

    I been out of this trade for a while and am looking for help and your suggestions!

    Thanks,

    Daniel
    Tags: None
  • #2
    Re: meguiars #91...

    Hi Daniel,

    M91 is an aggressive product. As long as the sanding marks are uniform and you have good technique the answer is yes.

    While it is easier to buff out finer marks, it is also recommended to use the least aggressive method. If you do not need 1000 grit, then 1200 or finer is recommended, and will certainly be easier to remove.
    Mike Pennington
    Director of Global Training, Events and Consumer Relations
    Meguiar's, Inc.
    800-854-8073
    mpennington@meguiars.com

    Comment

    • #3
      Re: meguiars #91...

      I am using a rotary buffer,what do you suggest i use after # 91 with a wool cutting pad and so on?

      thanks in advance!

      Comment

      • #4
        Re: meguiars #91...

        I was very happy with the #67.
        Before



        After


        Skål, Todd

        ~Nehalennia ∆~ Celtic Goddess of the Seafarers

        Comment

        Previous template Next
        Your Privacy Choices
        Working...
        X