Originally posted by Nick Winn
View Post
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Meguiar's Hybrid Paint Coating
Collapse
X
-
Hybrid paint coating was not my type. Water repellent is good but It is not close to slickness. How can I safely remove this coat?
Leave a comment:
-
Originally posted by RPPM View Post
Nick, if I stock up, what is the assumed shelf life of the product? It would be stored between 60 and 70 degrees Fahrenheit, indoors. Thank you.
I do have a few cans of Fast Finish, now a few years old, and they seem to be perfect whennused. I assume thisbwould be similar? Being an aerosol and all???
Leave a comment:
-
Originally posted by Nick Winn View Post
It is being phased out, yes, unfortunately - so get it while you can. Agreed, great product.
Leave a comment:
-
Lol, when they discontinued that I grabbed about 6 of them on discount.
Leave a comment:
-
Maybe bring back Ultimate Fast Finish ?? Sorry, I couldn’t help myself.
Leave a comment:
-
Are there plans for a replacement type product in the segment? Or will M27 fall as the top Megs sealant/topper??
Leave a comment:
-
Hi Nick,
Is this product being discontinued? I certainly hope not, it is a tremendous product.
Leave a comment:
-
Originally posted by Mr Miyagi View PostA couple of questions/observations:
Can the product be used on 'clear mask' products?
If I just did a traditional detail (wash/clay/polish/wax) can I use the product now or does the wax need to be removed first
I noticed in the video you applied the product and hit the rubber trim on the sunroof...Is it intended to be used on rubber/plastic trim pieces?
Regarding your traditional detail question, yes you would need to fully remove the wax.
It is not intended to be used on rubber/plastic trim, however many people have with good results.
Leave a comment:
-
A couple of questions/observations:
Can the product be used on 'clear mask' products?
If I just did a traditional detail (wash/clay/polish/wax) can I use the product now or does the wax need to be removed first
I noticed in the video you applied the product and hit the rubber trim on the sunroof...Is it intended to be used on rubber/plastic trim pieces?
Leave a comment:
-
Re: Meguiar's Hybrid Paint Coating
After applying Hybrid Paint Coating, I understand it is best to maintain with Hybrid Ceramic products having similar base chemistries to take advantage of the water beading characteristics of the coating. Now that you have me hooked on Rinse Free Express Wash & Wax, D11501 it raises the question. Is Rinse Free Express Wash & Wax a good option to maintain Hybrid Paint Coating? Are there any better options for rinse free wash?
Leave a comment:
-
Re: Meguiar's Hybrid Paint Coating
Originally posted by namuramc View PostHi guys, just finished applying the Hybrid Paint Coating and it was a breeze to apply! Just thought to ask, I have an old bottle of Ultimate quick wax lying around. Would that be usable to top off the coating, say after a wash? Thanks!Originally posted by Buddy View PostFrom what I have understood you would want to use something like M799 or Ceramic Detailer, going to Ultimate wax would take away from the coating. Also use Hybrid Ceramic Wash & Wax to clean it, that soap works amazing!!
Leave a comment:
-
Re: Meguiar's Hybrid Paint Coating
From what I have understood you would want to use something like M799 or Ceramic Detailer, going to Ultimate wax would take away from the coating. Also use Hybrid Ceramic Wash & Wax to clean it, that soap works amazing!!
Leave a comment:
Leave a comment: