• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

MBZ SL 500 Detail

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    MBZ SL 500 Detail

    My friend cafemoc and I have been doing some Saturday details for some of our friends at work, so I thought I would share this one with everyone.

    Here is cafemoc, with his ride, in the morning



    Here is a shot of the SL just after it's NXT car wash.



    Here are a few before shots.









    The car is kept in the garage when not in use, so the surface was virtually clean from above surface contaminents. We did a test spot with #80 and another test with #83. We both agreed that #83 had the best resuts. NXT Tech Wax for the beautiful shine.











    I just love BLACK cars!!!
    Tags: None
  • #2
    Looks great! Nothing shines like a black car. Only problem is, nothing shows defects like a black car too. Love the SL though. Nice work.
    "I drink windex........it keeps me from streaking."

    Comment

    • #3
      DAAS RIGHT BABY!! Looks sweet!

      Direct sun shot!! I loveit ---

      Freedom prospers when Christianity is vibrant and the rule of law under God is acknowledged

      Comment

      • #4


        Very Good Work!!!!!!

        Comment

        • #5
          It lookes GREAT!!!!!
          on which spot did you do the testing with the #80 and #83?
          People who know cars know meguiars!

          Comment

          • #6
            Wow the car looks great after the make over, with all the swirl removed .

            Did you get the job done with a PC or a rotary ? What pad did you use with #83 and did you go over the car again with #80 (with what pad) after #83 ?

            Comment

            • #7
              You two guys are making us proud!
              Mike Phillips
              760-515-0444
              showcargarage@gmail.com
              "Find something you like and use it often"

              Comment

              • #8
                looking real good. so you only used #83 and nxt? wow...

                Comment

                • #9
                  Originally posted by Erik
                  It lookes GREAT!!!!!
                  on which spot did you do the testing with the #80 and #83?
                  Hi Erik,
                  We did the test on a section of the hood, but I didn't take a photo of it. I will put that in my memory bank for our next detail.

                  Originally posted by Gen2
                  Did you get the job done with a PC or a rotary ? What pad did you use with #83 and did you go over the car again with #80 (with what pad) after #83?
                  Hi Gen2,
                  We both used our G-100's and our yellow W-8006 Soft Buff® Foam Polishing Pads. There was no hazing with the #83, so we just went to the Tech wax and used the ultimate bonnet for that beautiful shine.

                  Originally posted by Mike Phillips
                  You two guys are making us proud!
                  Thanks Mike, We owe it ALL to you.

                  Comment

                  Previous template Next
                  Your Privacy Choices
                  Working...
                  X