Tweet
Washed 2BM with Chemical Guys Citrus Clear @ Stripping Strength 2oz per 1 gallon
Let the soap dwell....
Some nasty stuff left on the emblem from dealers "ace" bodyshop who detailed the car.
Hit with Optimum Power Clean to see if that would knock it out
Agitated with Race Glaze Brush....
Still there UGH!
Got it with a SEM solv soaked detailing stick
Wheels & Tires hit with OPC
After washing and blown dry with the leaf blower....the car doesn't look that bad does it???
Broke out the D300
The tape doesn't lie....
Took a break and then it was time to wash the pad....
Just filled with warm water....
Broke out the 3 inch pads for above the doors and front bumper areas
Even though this doesn't splatter..it never hurts to tape, in case of a dribble
Tale of the tape
I roughly tapped up the roof to help me keep track of whats been done.
After compounding with D300
Broke out the D301
Look how much the D301 changed the paint....again tape don't lie!
D301 applied!
Some quick afters....
Still have the dress the tires, clean glass, and polish the exhaust tip. Doesn't look too bad for a "beater"
Let the soap dwell....
Some nasty stuff left on the emblem from dealers "ace" bodyshop who detailed the car.
Hit with Optimum Power Clean to see if that would knock it out
Agitated with Race Glaze Brush....
Still there UGH!
Got it with a SEM solv soaked detailing stick
Wheels & Tires hit with OPC
After washing and blown dry with the leaf blower....the car doesn't look that bad does it???
Broke out the D300
The tape doesn't lie....
Took a break and then it was time to wash the pad....
Just filled with warm water....
Broke out the 3 inch pads for above the doors and front bumper areas
Even though this doesn't splatter..it never hurts to tape, in case of a dribble
Tale of the tape
I roughly tapped up the roof to help me keep track of whats been done.
After compounding with D300
Broke out the D301
Look how much the D301 changed the paint....again tape don't lie!
D301 applied!
Some quick afters....
Still have the dress the tires, clean glass, and polish the exhaust tip. Doesn't look too bad for a "beater"
Comment