Tweet
Hi, we have recently finished this Mercedes 560 SEC after giving it the full works!!
The car was washed using Autosmart Autowash and the engine bay thoroughly cleaned using Traffic Film Remover (sorry, no before pics)
We then dried it off and evaluated the cars condition.
[IMG]
[/IMG]
It doesn't look too bad but on closer inspection
The Hood was badly faded
[IMG]
[/IMG]
The Trunk had swirls, holograms and fade
[IMG]
[/IMG]
Swirls on the C Pillar
[IMG]
[/IMG]
The car was then clayed using Megs clay and given a full machine polish using the DAMF system. This paint is quite soft so a second application of Correction Compound was applied with lighter pressure before following up with the Finishing Wax.
50/50 shots
The Hood
[IMG]
[/IMG]
The Trunk
[IMG][/IMG]
The Roof
[IMG]
[/IMG]
Hood to Fender
[IMG]
[/IMG]
The engine bay was dressed with Autosmart Finish and the air cleaner sanded with 3000 grit wet and dry and machine polished to give a mirror finish.
[IMG]
[/IMG]
The interior was given a full wet vac and the seats cleaned with Autosmart Brisk Low Foam. (Sorry for the lack of after pics)
50/50 shots of the drivers seat base and centre arm rest.
[IMG]
[/IMG]
[IMG]
[/IMG]
The car finally had a coat of Autoglym Extra Gloss Protection Sealant applied and the tyres dressed with Autosmart Finish
Enjoy the after shots!!
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
Total time spent on this detail was approx 24 Hours.
Many thanks for looking
Mark
The car was washed using Autosmart Autowash and the engine bay thoroughly cleaned using Traffic Film Remover (sorry, no before pics)
We then dried it off and evaluated the cars condition.
[IMG]
[/IMG]It doesn't look too bad but on closer inspection
The Hood was badly faded
[IMG]
[/IMG]The Trunk had swirls, holograms and fade
[IMG]
[/IMG]Swirls on the C Pillar
[IMG]
[/IMG]The car was then clayed using Megs clay and given a full machine polish using the DAMF system. This paint is quite soft so a second application of Correction Compound was applied with lighter pressure before following up with the Finishing Wax.50/50 shots
The Hood
[IMG]
[/IMG]The Trunk
[IMG]
[/IMG]The Roof
[IMG]
[/IMG]Hood to Fender
[IMG]
[/IMG]The engine bay was dressed with Autosmart Finish and the air cleaner sanded with 3000 grit wet and dry and machine polished to give a mirror finish.
[IMG]
[/IMG]The interior was given a full wet vac and the seats cleaned with Autosmart Brisk Low Foam. (Sorry for the lack of after pics)
50/50 shots of the drivers seat base and centre arm rest.
[IMG]
[/IMG][IMG]
[/IMG]The car finally had a coat of Autoglym Extra Gloss Protection Sealant applied and the tyres dressed with Autosmart Finish
Enjoy the after shots!!
[IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG]Total time spent on this detail was approx 24 Hours.
Many thanks for looking
Mark
Comment