Tweet
Co-Worker of a recent ZO6 I did was referred to me to take care of his 911 Turbo. It's a 07 with 7k miles on it and he wanted to get it back in tip top shape. It was in pretty good shape for the most part except the passenger door. This area looked like someone had taken a dry brush and marred it up pretty good. It had some light oxidation going on towards the edges of the door as well.
Exterior:
ONR washed
Clayed using Clay Magic blue clay
Wheels and calipers cleaned with Sonax Full Effect and APC+ in some areas sprayed onto a brush to prevent from touching the brakes/rotors
Wheel wells cleaned with ONR & APC+ and various brushes
Meguiars D300 and 5" MF cutting disk used to correct the passenger door
Menzerna SIP & Orange LC pad on the rest of the car and the passenger door
Sealed with Wolfgang Fuzion by hand including wheel barrels and door jams
Rubber & Trim dressed with ShowRoom FX White Pearl
Glass treated with Stoners invisible glass
Interior:
Vacuum/dry brush/vaccum
All surfaces were cleaned & protected with Meguiars Quick Interior Detailer
Seats were cleaned with APC+ & upholstery brush
Conditioned with Meguiars Leather Conditioner
Glass treated with Stoners Invisible Glass
And to the pictures...
Calipers before. Each one were pretty bad with baked on brake dust and grime.
Passenger door marring/swirling. The rest of the car was in really good shape with minimum swirling however the entire passenger door was in this condition and required some heavy compounding.
Taped up after being clayed.
Tail lights needed some loving as well.
Interior
Interior
Cleaned calipers
Calipers cleaned with Sonax Full Effected and various brushes. Wheel barrels cleaned with Meguiars APC+ and various brushes.
Wheels cleaned with Sonax Full Effect and various brushes. Tires were dressed with ShowRoomFX White Pearl.
Seats were cleaned with APC+ and an upholstery brush then conditioned with Meguiars Leather Conditioner to leave them feeling soft and bringing back their satin shine.
Door corrected.
No more swirls or marring.
Tails corrected.
Thanks for checking out!
Questions/Comments welcome!
Brian
Exterior:
ONR washed
Clayed using Clay Magic blue clay
Wheels and calipers cleaned with Sonax Full Effect and APC+ in some areas sprayed onto a brush to prevent from touching the brakes/rotors
Wheel wells cleaned with ONR & APC+ and various brushes
Meguiars D300 and 5" MF cutting disk used to correct the passenger door
Menzerna SIP & Orange LC pad on the rest of the car and the passenger door
Sealed with Wolfgang Fuzion by hand including wheel barrels and door jams
Rubber & Trim dressed with ShowRoom FX White Pearl
Glass treated with Stoners invisible glass
Interior:
Vacuum/dry brush/vaccum
All surfaces were cleaned & protected with Meguiars Quick Interior Detailer
Seats were cleaned with APC+ & upholstery brush
Conditioned with Meguiars Leather Conditioner
Glass treated with Stoners Invisible Glass
And to the pictures...
Calipers before. Each one were pretty bad with baked on brake dust and grime.
Passenger door marring/swirling. The rest of the car was in really good shape with minimum swirling however the entire passenger door was in this condition and required some heavy compounding.
Taped up after being clayed.
Tail lights needed some loving as well.
Interior
Interior
Cleaned calipers
Calipers cleaned with Sonax Full Effected and various brushes. Wheel barrels cleaned with Meguiars APC+ and various brushes.
Wheels cleaned with Sonax Full Effect and various brushes. Tires were dressed with ShowRoomFX White Pearl.
Seats were cleaned with APC+ and an upholstery brush then conditioned with Meguiars Leather Conditioner to leave them feeling soft and bringing back their satin shine.
Door corrected.
No more swirls or marring.
Tails corrected.
Thanks for checking out!
Questions/Comments welcome!
Brian
Comment