Hey Everybody 
My cousins range rover needed some attention with its leather seats, they were really dirty and just didn't look good at all. They had years of dirt and grime built up and just wiping them down with a leather cleaner product wasn't gonna cut it.
As for the rest of the interior, they vacuum it to keep the carpet clean but that's about all they know how to do.
Most of my pics are about the seats since the rest was already pretty clean.
Before:
Passenger seat


Drivers seat, this was the worst of all. Notice how years of dirt and body oils make the seat look greasy and shiny


Back seats



It would have been hard to see the difference between before and afters since the color is beige/tan so I took 50/50s randomally as a I was going.
Here's my process.
- Clean all leather and hard surfaces with APC 10:1 and agitate with a brush
- Condition leather with Gold Class Rich Leather Cleaner and Conditioner
- Condition vinyl with M40
50/50s

Hard to tell on this one, better in person!

The next two pretty much speak for them selves


Used some masking tape this time to show a clearer 50/50

During

After:
Passenger seat


Between the seats, remember the 50/50 of this

Drivers seat. Huge Improvement


Back seats






Heres a got of the dash areas after being cleaned the same way

This one was taken right after I wiped off the APC, it looks like I missed a spot

My cousins range rover needed some attention with its leather seats, they were really dirty and just didn't look good at all. They had years of dirt and grime built up and just wiping them down with a leather cleaner product wasn't gonna cut it.
As for the rest of the interior, they vacuum it to keep the carpet clean but that's about all they know how to do.
Most of my pics are about the seats since the rest was already pretty clean.
Before:
Passenger seat


Drivers seat, this was the worst of all. Notice how years of dirt and body oils make the seat look greasy and shiny


Back seats



It would have been hard to see the difference between before and afters since the color is beige/tan so I took 50/50s randomally as a I was going.
Here's my process.
- Clean all leather and hard surfaces with APC 10:1 and agitate with a brush
- Condition leather with Gold Class Rich Leather Cleaner and Conditioner
- Condition vinyl with M40
50/50s

Hard to tell on this one, better in person!

The next two pretty much speak for them selves


Used some masking tape this time to show a clearer 50/50

During

After:
Passenger seat


Between the seats, remember the 50/50 of this

Drivers seat. Huge Improvement


Back seats






Heres a got of the dash areas after being cleaned the same way

This one was taken right after I wiped off the APC, it looks like I missed a spot

Comment