• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

My First Interior Detail '99 F250

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: My First Interior Detail '99 F250



    The interior looks 1,000,000 times better.

    Hopefully you can find a way to get into this hinge area, if not I'd blast it with a bit of brake clean with a rag underneath to catch any that drips and then I'd give them a shot of WD40.

    Other than those minor, minor details, it looks like she is ready to flip.
    Good luck on the sale... if you are still selling it.

    Comment


    • #17
      Re: My First Interior Detail '99 F250

      Bery nice work

      Comment


      • #18
        Re: My First Interior Detail '99 F250

        Nice work, long time coming for this one eh!

        Comment


        • #19
          Re: My First Interior Detail '99 F250

          Originally posted by Bill Davidson View Post

          The interior looks 1,000,000 times better.

          Hopefully you can find a way to get into this hinge area, if not I'd blast it with a bit of brake clean with a rag underneath to catch any that drips and then I'd give them a shot of WD40.

          .
          Thats a good idea! I appreciate that!

          I basically gutted the whole truck. I pre-treated the carpet with APC then rolled it up and let it sit overnight and took it to the car wash the next morning. I pulled all of the weatherstripping off of the truck and washed it all by hand as all the cracks were caked with mud. I pulled all the seat belts out and let them all soak in what was left over of my wash bucket from washing the jambs out then laying them out flat on the concrete and scrubbing them all with a brush and apc on both sides then rinsing in a clean bucket of water. The ones with retractors i just pulled all the way out and put a clamp on them so they wouldnt retract then clamped the retractor to the outside lip of the bucket so they would stay dry and left them clamped until the whole process was done and they had dried out over the weekend. It turned out pretty well considering what it was to start with. I dont think there is anyone who could make that truck 100% perfect.
          There's Room For All Of God's Creatures!!! Right Next To The Mashed Potatoes!!!

          Comment


          • #20
            Re: My First Interior Detail '99 F250

            Originally posted by Ravi_1992 View Post
            Nice work, long time coming for this one eh!

            Yeah there was a lot of hours in it for sure. Had to do it over the course of several days as i had other things i had to do as well. Now if i can just get it sold all will be good!
            There's Room For All Of God's Creatures!!! Right Next To The Mashed Potatoes!!!

            Comment


            • #21
              Re: My First Interior Detail '99 F250

              Massive difference!!!
              2011 Ford Mustang GT Cali Special
              2012 Kia Sorento EX

              Comment


              • #22
                Re: My First Interior Detail '99 F250

                I almost forgot, i have to give my wife credit for taking the drivers seat bottom apart and pulling off the seat cover to sew up the rip that was visible in the before pics. Thanks Babe!
                There's Room For All Of God's Creatures!!! Right Next To The Mashed Potatoes!!!

                Comment

                Your Privacy Choices
                Working...
                X