Tweet
So a guy from our local car club has been asking me for a while now if I'd detail car. He didn't want to take it to anyone else which is obviously appreciated, but little did I know what I was in for. I've detailed some pretty swirled up cars but I believe this one tales the cake! He had it detailed a while ago by some hack shop who only cared about speed and NOT quality. As a result he had lots of buffer trails and just swirls on top of swirls. His passenger side door had also been side swiped so I had a LOT of scuffs and scratches to contend with.
Here's the condensed version of the process....
wash with Meguiars Gold Class
Meguiars Smooth Surface Clay Kit
polish with Monzerna SIP/106FF
wash again
Danase Wet Glaze (One of the very few glazes you can put a sealant on since it's acrylic based)
Sealed with Ultima Paint Guard Plus
Waxed with P21S
Wiped down with Zaino Z-8
Tires cleaned with Eagle One A-Z tire cleaner
Wheel Wax on Rims
Zaino Z-16 on tires
Mothers Alum Polish on Exhaust
Nano One Protectant on interior (I forgot interior shot).
CD2 Engine Detailer on engine but no engine shots.
There's going to be a ton of pics as I'm going to take you all around the car so here we go....
Here's the car before
Here's some close up's of the carnage....
Hood
Rear hatch area
Here's the passenger door that was hit
Close up of a spot on the hood (crazy swirls!!!!)
So even though these pics don't do justice as to just how bad the car was, you get the idea. Now into the garage for 16 hours of polishing. I'll now show you before and afters....this is gonna be good!
Hood before
Half hood polished
Polished!
Looking down at hood before
Looking down after
Cool pic looking into hood after polishing. Looks like a mirror.
Front driver side fender before
Half polished
Polished
Half the driver door polished
Rear hatch with half polished
Here is the passenger door that had been hit.
Half polished
All polished! There were some small scratches that were too deep for me to correct but overall, it's about 98% corrected!
This is where the bulk of the scratches where when he was hit.
Passenger fender before
Passenger after
Hood outside before
Hood outside after polishing (this wasn't sealed or waxed yet!)
Crazy swirled spot before
Crazy spot polished
Exhaust before
After
Rear wheel before
After
Ok, 16 hours later we have full car shots! I'm NO photographer but hopefully I was able to kind of capture just how slick, deep and wet the paint looked.
So there you have a it. A TON of pics but it was a HUGE job so hopefully you enjoyed see the progress as much as I did. I'm now going to ice my hands for the next 2 days.
Here's the condensed version of the process....
wash with Meguiars Gold Class
Meguiars Smooth Surface Clay Kit
polish with Monzerna SIP/106FF
wash again
Danase Wet Glaze (One of the very few glazes you can put a sealant on since it's acrylic based)
Sealed with Ultima Paint Guard Plus
Waxed with P21S
Wiped down with Zaino Z-8
Tires cleaned with Eagle One A-Z tire cleaner
Wheel Wax on Rims
Zaino Z-16 on tires
Mothers Alum Polish on Exhaust
Nano One Protectant on interior (I forgot interior shot).
CD2 Engine Detailer on engine but no engine shots.
There's going to be a ton of pics as I'm going to take you all around the car so here we go....
Here's the car before
Here's some close up's of the carnage....
Hood
Rear hatch area
Here's the passenger door that was hit
Close up of a spot on the hood (crazy swirls!!!!)
So even though these pics don't do justice as to just how bad the car was, you get the idea. Now into the garage for 16 hours of polishing. I'll now show you before and afters....this is gonna be good!
Hood before
Half hood polished
Polished!
Looking down at hood before
Looking down after
Cool pic looking into hood after polishing. Looks like a mirror.
Front driver side fender before
Half polished
Polished
Half the driver door polished
Rear hatch with half polished
Here is the passenger door that had been hit.
Half polished
All polished! There were some small scratches that were too deep for me to correct but overall, it's about 98% corrected!
This is where the bulk of the scratches where when he was hit.
Passenger fender before
Passenger after
Hood outside before
Hood outside after polishing (this wasn't sealed or waxed yet!)
Crazy swirled spot before
Crazy spot polished
Exhaust before
After
Rear wheel before
After
Ok, 16 hours later we have full car shots! I'm NO photographer but hopefully I was able to kind of capture just how slick, deep and wet the paint looked.
So there you have a it. A TON of pics but it was a HUGE job so hopefully you enjoyed see the progress as much as I did. I'm now going to ice my hands for the next 2 days.
Comment