So I did this detail a while back, but just recently found pictures for it.... anyway the customer called to have her car cleaned up. She said it has been sitting for about 4 months due to a broke transmission and wanted me to come out and clean it up since it was fixed and ready for sale (minus the flat tire). She also said that the interior was a little dirty... ok we get there.... interior is horrible. There was food in every single crevice I could find, along with food we found a good amount of mold already forming... needless to say 5 hours into the detail we managed to get the interior looking OK. I just wanted to focus on getting rid of ALL debris and mold. The customer said the stains and such can stay, but being anal we removed everything. Here are some pics of this mess:
Before:

After:

Before:

After:

Before:

After:

Before:

After:

Before:

After:

Before:

After:

Sorry I managed to lose or delete accidentally some of the final pics of the stains completely removed and overall interior. Process used on the inside:
-vaccuum
-after seeing the mold and such the seats were removed
-everything was sprayed down with APC and brushed out by hand
-vaccuum
-sprayed with APC again
-used our little WEN polishers with 4" carpet brushes over entire carpet/seats
-vaccuum
-dash and plastucs were cleaned using APC
-dash and plastics were dressed with hyper dressing
-vaccuum
-everything was put back together
-used APC and some brushes again on the tougher stains that still came through
-vaccuumed last time
-Dakota Odor Bomb was used as well
Ouside:
-presoak with hyperwash and foamgun
-washed vehicle
-mild claybar
-Meguiar's M205 on wheels
-Zaino clear seal on wheels
-Meguiar's Endurance gel on tires
-D151 was used on paint
Wheel Before:

Wheel After:

Afters:






sorry for all the pics, but it was definetly one of the worse cases I have seen personally. Thanks for looking
Rafal
Before:

After:

Before:

After:

Before:

After:

Before:

After:

Before:

After:

Before:

After:

Sorry I managed to lose or delete accidentally some of the final pics of the stains completely removed and overall interior. Process used on the inside:
-vaccuum
-after seeing the mold and such the seats were removed
-everything was sprayed down with APC and brushed out by hand
-vaccuum
-sprayed with APC again
-used our little WEN polishers with 4" carpet brushes over entire carpet/seats
-vaccuum
-dash and plastucs were cleaned using APC
-dash and plastics were dressed with hyper dressing
-vaccuum
-everything was put back together
-used APC and some brushes again on the tougher stains that still came through
-vaccuumed last time
-Dakota Odor Bomb was used as well
Ouside:
-presoak with hyperwash and foamgun
-washed vehicle
-mild claybar
-Meguiar's M205 on wheels
-Zaino clear seal on wheels
-Meguiar's Endurance gel on tires
-D151 was used on paint
Wheel Before:

Wheel After:

Afters:






sorry for all the pics, but it was definetly one of the worse cases I have seen personally. Thanks for looking
Rafal
Comment